1) Stretching creep rate
拉伸状态下的蠕变速率
2) tensile creep
拉伸蠕变
1.
Tensile creep damage of 2D-C/SiC composites evaluated using the fractal dimension and elastic modulus;
分形维数和弹性模量衰减表征2D-C/SiC的拉伸蠕变损伤
2.
Some deformation characteristics of tensile creep revealed by a test of frozen saturated loess are presented in this paper.
本文以试验为依据揭示饱水冻结黄土拉伸蠕变过程的若干特点。
3) steady-state creep rate
稳态蠕变速率
1.
An optimization method of parameter estimate was presented to calculate the constants in the phenomenological equation of steady-state creep rate in a larger temperature and stress range and then the feasibility of the o.
GH4049合金各温度下的稳态蠕变速率与所施加的应力,在双对数坐标系下呈线性关系,应力指数平均值为7。
2.
631 and the steady-state creep rate is calculatedas as <1.
6 31、稳态蠕变速率小于 1。
4) Tensile creep machine
拉伸蠕变仪
5) SSRT
慢应变速率拉伸
1.
Stress Corrosion Cracking of polythionic acids(PSCC) of 304 SS were investigated by SSRT,SEM and metallographic analysis.
采用慢应变速率拉伸试验(SSRT)、扫描电镜断口分析以及金相显微组织分析等方法对304不锈钢连多硫酸应力腐蚀开裂(PSCC)行为进行了研究。
2.
The stress corrosion behavior of 304 stainless steel in the solution saturated by H2S and the standard solution of NACE was studied with electrochemical test and slow strain rate tension(SSRT) test.
用电化学测试及慢应变速率拉伸试验(SSRT)方法对304不锈钢在饱和H2S溶液和NACE标准溶液中的应力腐蚀行为进行研究。
3.
Stress Corrosion cracking of acids media(PSCC) of duplex stainles steel and ferritic stainless steel were investigated by SSRT,SEM and metallographic analysis and evaluate stress corrosion cracking sensitivity of ferritic stainless steel and duplex stainless steel in acids media.
采用慢应变速率拉伸试验(SSRT)、扫描电镜(SEM)断口分析以及金相显微组织分析等方法对TP405铁素体不锈钢及2205双相不锈钢在酸性介质中应力腐蚀开裂(PSCC)行为进行了研究。
6) slow strain rate tension
慢应变速率拉伸
1.
The stress corrosion cracking (SCC) behaviors of X80 pipeline steel in near-neutral pH solutions were studied using electrochemical potentiodynamic scanning,slow strain rate tension(SSRT) and scanning electron microscopy.
采用电化学动电位扫描技术、慢应变速率拉伸(SSRT)试验和扫描电镜观察研究了X80管线钢及焊接接头在NS4溶液中的应力腐蚀行为。
2.
5% NaCl solution was investigated by using slow strain rate tension,scanning electron microscope and transmission electron microscope.
通过慢应变速率拉伸测试、扫描电镜及透射电镜分析等研究了2519铝合金在T6、T8热处理状态下,在空气和3。
3.
The interaction between mechanics and electrochemistry during the stress corrosion cracking (SCC) of 7075 aluminum alloy was studied using slow strain rate tension (SSRT) technique.
用慢应变速率拉伸(SSRT)技术研究了7075铝合金在应力腐蚀过程中的力学与电化学交互作用。
补充资料：拉伸蠕变
分子式：
CAS号：
性质：具有黏弹性的高分子材料，在一定温度和较小恒定拉力作用下，材料的变形随时间的增长而逐渐变大的现象。蠕变是材料在弹性极限内受长期施加的应力作用而产生的永久形变、高弹形变和普弹形变的总和
CAS号：
性质：具有黏弹性的高分子材料，在一定温度和较小恒定拉力作用下，材料的变形随时间的增长而逐渐变大的现象。蠕变是材料在弹性极限内受长期施加的应力作用而产生的永久形变、高弹形变和普弹形变的总和
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条