1) medium-thick cylinder
中壁圆筒
2) Thick wall cylinder
厚壁圆筒
1.
A hydraulic method for determining incipient yield pressure of thick wall cylinder;
测定厚壁圆筒初始屈服压力的液压方法
2.
This paper performs the limit analysis of a thick wall cylinder of linear strengthened material based on the unified strength theory.
运用统一强度理论对承受内压的拉压屈服强度不同的 线性强化材料的厚壁圆筒进行了极限载荷分析,得到了适用 于多种材料的厚壁圆筒极限载荷的统一解析式。
3.
Using elastic solution of thick wall cylinder, it is analyzed that the optimum design on three-layers assembled cavity die of cold extrusion under the elastic limit stress.
应用厚壁圆筒的弹性解 ,分析了冷挤压三层组合凹模具有最大弹性极限时的优化设计 ,推导了三层组合凹模的最大承压、各层分界面半径和分界面过盈量的优化设计计算公式。
3) thin-walled cylinder
薄壁圆筒
1.
On the study of stress-strain of thin-walled cylinder tensile specimens at high temperature;
高温下薄壁圆筒拉伸试样的应力-应变关系研究
2.
Furthermore, criterion to distinguish between thick-walled cylinder and thin-walled cylinder under dynamic loading is studied.
从厚壁圆筒弹性动应力解出发,给出了厚壁圆筒内外径处的环向应力的简化计算公式,并提出了在动载荷作用下区分厚壁圆筒和薄壁圆筒的一个准则,认为当K≤1。
3.
Based on the unified limit solutions of thin-walled cylinder,the ultimate load calculation formula of concrete-filled double-skin steel-tube stub column under axial loads was derived by considering the internal and external thin-walled steel-tube effect.
针对圆中空夹层钢管混凝土轴压短柱的极限承载力,应用薄壁圆筒的统一强度理论极限解,考虑内圆与外圆中空夹层钢管混凝土的内外钢管薄壁效应,提出了计算公式,与文献资料的试验结果做了比较。
4) thin-walled column
薄壁圆筒
1.
Research on thin-walled column parts with finite element analysis method;
薄壁圆筒零件变形的有限元法研究
2.
In this paper three types of load schemes(general method;rigid region;transfer ring load by rigid beam) are used to analyzing the thin-walled column parts.
在阐述薄壁圆筒结构有限元分析的三种加载方法(常规加载方法;局部建立刚性区域;刚性梁传递载荷)的基础上,分别运用这三种方法对门座起重机圆筒门架结构进行了静力学分析,并做了分析比较。
5) thick walled cylinder
厚壁圆筒
1.
A study was presented for the carrying capacity of a thick walled cylinder in consideration of the softening effect on the basis of unified strength criterion and elasto brittle plastic model.
应用统一强度准则和弹脆塑性变形模型,研究材料具有软化效应的厚壁圆筒的承载力。
2.
Thispaper makesan autofrettage analysisof thick walled cylinder of material with different yield strength in tension and compression based on unified strength theory.
运用统一强度理论对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析,得到了适用于多种材料的厚壁圆筒弹性区与塑性区中的应力分布,残余应力分布及合成应力分布的统一解析式,分析得出了最佳弹塑性半径和最佳自增强内压的统一解析
6) thick cylinder
厚壁圆筒
1.
Study on thermal deformation of thick cylinder in uneven temperature field;
非均匀温度场中厚壁圆筒变形研究
2.
A fatigue strength design criterion of thick cylinders subjected to repeated internal pressure;
一种受循环内压厚壁圆筒的疲劳强度设计准则
3.
Coulomb yield-law is used to determine elastic and plastic limiting load of thick cylinder and thick sphere in strength-differential material.
本文利用库仑屈服准则,研究了拉压异性材料厚壁圆筒和厚壁球壳的弹性极限载荷和塑性极限载荷,得出了新的结果和结论。
补充资料：古意题徐令壁（一作题著作令壁）
【诗文】：
白云苍梧来。
氛氲万里色。
闻君太平世。
栖泊灵台侧。
【注释】：
【出处】：
全唐诗：卷84_54
白云苍梧来。
氛氲万里色。
闻君太平世。
栖泊灵台侧。
【注释】：
【出处】：
全唐诗：卷84_54
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条