1) large thin-wall cylinder
薄壁大圆筒
1.
The causes affecting surface quality of large thin-wall cylinder during precasting are analyzed and relevant preventive measures are put forward.
对薄壁大圆筒在预制过程中影响其表面质量的原因进行了分析,并针对其原因提出了相应的预防措施。
2) large diameter cylinder
大直径薄壁圆筒
1.
Dynamic response analysis model for large diameter cylinder breakwater under the action of random wave;
随机波浪作用下大直径薄壁圆筒防波堤的动力分析模型
3) thin-walled cylinder
薄壁圆筒
1.
On the study of stress-strain of thin-walled cylinder tensile specimens at high temperature;
高温下薄壁圆筒拉伸试样的应力-应变关系研究
2.
Furthermore, criterion to distinguish between thick-walled cylinder and thin-walled cylinder under dynamic loading is studied.
从厚壁圆筒弹性动应力解出发,给出了厚壁圆筒内外径处的环向应力的简化计算公式,并提出了在动载荷作用下区分厚壁圆筒和薄壁圆筒的一个准则,认为当K≤1。
3.
Based on the unified limit solutions of thin-walled cylinder,the ultimate load calculation formula of concrete-filled double-skin steel-tube stub column under axial loads was derived by considering the internal and external thin-walled steel-tube effect.
针对圆中空夹层钢管混凝土轴压短柱的极限承载力,应用薄壁圆筒的统一强度理论极限解,考虑内圆与外圆中空夹层钢管混凝土的内外钢管薄壁效应,提出了计算公式,与文献资料的试验结果做了比较。
4) thin-walled column
薄壁圆筒
1.
Research on thin-walled column parts with finite element analysis method;
薄壁圆筒零件变形的有限元法研究
2.
In this paper three types of load schemes(general method;rigid region;transfer ring load by rigid beam) are used to analyzing the thin-walled column parts.
在阐述薄壁圆筒结构有限元分析的三种加载方法(常规加载方法;局部建立刚性区域;刚性梁传递载荷)的基础上,分别运用这三种方法对门座起重机圆筒门架结构进行了静力学分析,并做了分析比较。
5) thin cylinder
薄壁圆筒
1.
Unified incremental solution of thin cylinder under step deformation path;
薄壁圆筒在阶形变形路径下的统一增量解
2.
Internal force calculation of thin cylinder under axial symmetrical load;
轴对称载荷作用下薄壁圆筒的内力计算
6) cylindrical shell
薄壁圆筒
1.
Stability calculation for thin cylindrical shells of the multi-serial uniform load thrust roller bearing;
多排均载推力轴承中薄壁圆筒稳定性计算
补充资料：宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组
宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组
宝鸡石油钢管厂大口径薄壁钢管的中508排辊成形机组
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条