1) flex ible anti-bending hinge
弹性抗弯铰法
2) bending-resistant spring hinge
抗弯弹簧铰
1.
The bending-resistant spring hinge model is adopted to simulate the behavior of the elastic bending of connecting joints.
引入抗弯弹簧铰模拟结构接头传递弹性弯矩的特性,建立了用于装配式公路钢桥竖向自由振动分析的带抗弯弹簧铰梁模型;利用有限元程序ANSYS对接头进行数值仿真,得到了抗弯弹簧铰刚度。
2.
The main work and results include: (1)A kind of bending-resistant spring hinge model is introduced to simulate the transferring elasticity-bendi.
主要工作和研究成果包括以下几方面: (1)提出了反映接头传递弹性弯矩性质的抗弯弹簧铰模型,并给出了确定带式舟桥和装配式公路钢桥连接接头抗弯弹簧铰刚度的方法;通过算例与相关文献试验结果比较,验证了抗弯弹簧铰模型的合理性。
3) Modulus of elasticity
抗弯弹性模量
1.
The objective of this study is to compare three nondestructive methods for evaluating the bending modulus of elasticity(MOE),modulus of rupture(MOR) and compressive strength parallel to grain(σ_c) of Eucalyptus grandia×E.
首先采用3种无损检测设备获得无疵小试样的动态弹性模量,然后进行抗弯弹性模量(MOE)、抗弯强度(MOR)和顺纹抗压强度(σc)的测定,并分析3种无损检测结果与木材强度性质的关系。
2.
The restrain conditions were the design goal of plywood modulus of elasticity parallel and perpendicular to the face grain,panel thickness and number of plies.
从单板压缩率和铺设角度入手,以每层单板厚度为设计变量,单板厚度的加权和最大值为目标函数,同时以胶合板顺纹、横纹抗弯弹性模量和总厚度满足给定设计目标为约束条件,建立了速生树种胶合板弯曲弹性性能优化设计模型。
4) elastic bending strength
弹性抗弯强度
1.
The influence of slip effect on the elastic bending strength of section steel concrete beam;
滑移效应对型钢混凝土梁弹性抗弯强度的影响
5) resistance stiffness
弹性抗弯刚度
1.
In this paper, the factor that effects the resistance stiffness of the member by contraction caused by temperature and intensity by prestress is studid.
研究了超长连续混凝土结构由于温度、收缩以及预应力产生的截面净拉力对单向受力构件弹性抗弯刚度的影响 ,推导了挠度计算的精确公式 ,给出了近似计算公式。
6) MOE
抗弯弹性模量
1.
The performance of the board was analyzed with modulus of elastic(MOE) and compressive strength.
为找出最佳的工艺条件 ,对板型结构和原料配方进行了实验研究 ,分析了聚氨酯泡沫塑料和聚氨酯复合包装板材的抗弯弹性模量、抗压强度这两项主要力学指标。
2.
We mainly studied the different influence of bending strength,MOE,flush tensile strength of bamboo was caused by different year-old and thickness of bamboo chick.
本实验主要研究不同年份、不同摆放方向和不同厚度的竹帘对竹木复合材的抗弯强度、抗弯弹性模量和平面抗拉强度的影响,结果表明,抗弯强度、抗弯弹性模量受年份和竹帘厚度的影响比平面抗拉强度所受的影响要小;9mm竹帘的竹木复合材料的平面抗拉强度受不同年份竹材的影响明显。
3.
The density,MOR,MOE,the index of thickness swelling were compared between bamboo and pressed bamboo.
并且对竹材进行三聚氰胺树脂浸渍处理,然后进行热压密实,将其与直接密实的竹材进行密度、抗弯强度、抗弯弹性模量、吸水厚度膨胀率的比较。
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条