1.
Method for determination of the modulus of elasticity in static bending of wood
GB/T1936.2-1991木材抗弯弹性模量测定方法
2.
Measurement of Elastic Modulus of Microstructure by Microjet Driving Microbending Test Method
微射流驱动弯曲测试法测量微结构的弹性模量
3.
Analysis of Compression Modulus of Resilience of Slab-Type Rubber Seat of Bridge
桥梁板式橡胶支座抗压弹性模量分析
4.
elastic modulo
弹性模数[模量];弹性组件;弹性计量单位
5.
Flexural strength and elasticity decreased significantly with increasing wood content.
4．含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
6.
Method for determination of the modulus of elasticity in compressive parallel to grain of wood
GB/T15777-1995木材顺纹抗压弹性模量测定方法
7.
Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
GB/T1943-1991木材横纹抗压弹性模量测定方法
8.
EXPERIMENTAL RESEARCH ON ELASTIC RESISTANT COEFFICIENT,DEFORMATION AND COMPRESSIVE MODULI OF SURROUNDING ROCK IN LARGE-SECTION LOESS TUNNEL
大断面黄土隧道围岩弹性抗力系数、变形模量与压缩模量试验研究
9.
Experimental Study of Inelastic Buckling Strength and Stiffness Requirements for Longitudinally Stiffened Panels
纵向加劲板非弹性抗弯强度和刚度试验研究
10.
flexural resilience
弯曲回弹性,挠曲回弹性;弯曲回弹能,挠曲回弹能
11.
Effects of Time-varying with Elasticity Equivalent Modulus of Cable on Seismic Behavior of Cable-stayed Bridge
拉索弹性模量时效改变对斜拉桥抗震性能的影响
12.
Numerical Simulation of Flexural Behavior of Corroded Reinforced Concrete Beams
锈蚀钢筋混凝土梁抗弯性能数值模拟
13.
apparent modulus of elasticity of rope
钢丝绳宏观弹性模量
14.
It is pointed that75℃ and200℃ are the threshold temperatures of elastic modulus and uniaxial compression strength respectively.
指出了75℃200℃别是花岗岩弹性模量和单轴抗压强度的门槛温度。
15.
Discussion on Increase Trend of Strength and Compression Elastic Modulus of Cored Slabs and Beams Along with Concrete Age
空心板梁混凝土强度与抗压弹性模量随龄期增长趋势探讨
16.
On the dynamic elastic modulus of concrete in the anti-earthquake design of concrete dams
论混凝土坝抗震设计与计算中混凝土动态弹性模量的合理取值
17.
Experimental research on compressive strength and elastic modulus of autoclaved fly ash perforated brick masonry
蒸压粉煤灰多孔砖砌体抗压强度及弹性模量试验研究
18.
The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus.
通过综合考虑挠度引起弹性模量和弹性伸长引起弹性模量推导出等效弹性模量。