1) weighing valve
称重阀
1.
The fundamental structure and functional principles for weighing valve assemblies for Y32(Ra) bogies are expounded.
阐述了Y3 2 (Ra)型转向架称重阀组件的基本结构和作用原理 ,给出了该称重阀的主要技术参数 ,并简单地介绍了该阀的试制过程和试验结
2.
The paper introduces principle of weighing valve,structure characteristics,performance experiment and loading experiment results.
设计新的CZ-1型称重阀,改用X-A型限压阀。
2) weighing
[英][wei] [美][we]
称重
1.
Design of Auto Measuring/ Weighing/ Stenciling System for Tubing Production;
油管自动测长、称重、喷标系统的设计
2.
Study on Spring Adjustment New Technology for Locomotive Body Weighing;
机车车体称重调簧新工艺研究
3.
Development of Intelligent Weighing Hammer Level Indicator Used in Colliery;
煤矿用智能称重式料位计的研制
3) weighting
[英]['weɪtɪŋ] [美]['wetɪŋ]
称重
1.
Determining Control and Weighting Control in Paint Produce;
涂料生产中的计量和称重控制
2.
When it was overload or light load,weight would be converted into power by measurement of the weighting sensor and the hopper gate was controlled by the electromagnetic valve so as to adjust transport quantity.
当超重或轻载时通过称重传感器的测量把重量转化为电量再通过电磁阀来控制漏斗门的大小,从而达到调节输送量的多少。
3.
A new method to decrease crane weighting errors and maicro-controller system are introduced in this paper The system is convenience, reliable and accuracy,which can be used in stations, harbors and storehouse, ec
介绍一种减小吊车称重误差的新方法及其单片机实现的软硬件系统，该系统简便、可靠、精度高， 经试用后认为很适用于车站、码头和仓库等场
4) weight
[英][weɪt] [美][wet]
称重
1.
In order to solve the weight measuring problem of small quality objects which often meets in moderncommercial trades and daily life,this text has introduced a new kind of designs of pocket type electronic balance.
本文主要阐述了称重传感器的工作原理、误差补偿、主要参数选择。
2.
This topic is entrusted by some company, requesting developed on one kind of weighing production line the cargo weight automatic network observation and control system.
本论文介绍了基于CAN总线的动态称重系统的硬件组成及软件设计。
3.
The information about the vehicle, such as its weight, its position, its route and so on, was concerned by the vehicle s administrant in the field of carrying trade.
本文就以车载多传感器称重系统为研究对象，对其进行多传感器系统建模研究和数据采集器的设计。
5) weigh
[英][weɪ] [美][we]
称重
1.
Application of Fieldbus in Oil Plant Weighing System;
现场总线技术在油脂行业称重系统中的应用
2.
Steel Coil Weighing System Based on FATEK PLC;
基于永宏PLC的钢卷称重系统
3.
The weight of the large-size structure can be measured by synchronously moving up of jacks.
大型结构物的称重通过多个千斤顶同步顶升实现。
6) unsymmetrical valve
非对称阀
1.
Research on pressure response characteristic of HPG unsymmetrical valve;
汽车动力转向器非对称阀压力静特性的研究
2.
According to hydraulic-circuit equivalent bridge model of valve,the universal formula of pressure response characteristic (PRC) of PSG unsymmetrical valve with errors of distributing oil-slot was established firstly.
根据阀的液压等效桥路模型,首次推导了非对称阀分配油槽存在尺寸和分度误差时的压力静特性的一般公式,定量地分析了这些误差对压力静特性的影响。
3.
The unsymmetrical cylinder controlled by unsymmetrical valve is often used in hydraulic servo system.
非对称阀控制非对称缸常见于液压伺服系统中 ,其主要动态性能参数如流量增益、流量 -压力系数对该类系统的动态性能有重要的影响 。
补充资料：溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力，保证进口压力恒定，p2＝0 | 通过调整弹簧的压力控制出油口的压力，保证出口压力p2稳定 | 直控式－通过调定调压弹簧的压力控制进油路压力；夜控式－由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭（原始状态） | 常开（原始状态） | 常闭（原始状态） |
工作状态 | 进出油口相通，进油口压力为调整压力 | 进油口压力低于出油口压力，出油口压力稳定在调定值上 | 进出油口相通，进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力，只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 | ||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条