1) diagonal cracking strength
剪切初裂强度
2) shear strength
剪切强度
1.
On shear strength testing method of explosion cladding joint;
爆炸复合接头剪切强度测试方法研究
2.
Effect of magnetic field on shear strength of adhesively bonded single lap joint;
外加磁场对粘接接头剪切强度的影响
3.
Interfacial reaction and shear strength of Sn-Zn-Cu/Cu joints;
Sn-Zn-Cu/Cu界面反应及剪切强度
3) shearing strength
剪切强度
1.
The adjusted shearing strength formula of rough rock joint;
粗糙岩石节理剪切强度的修正公式
2.
Effect of rosin contents of lead-free solder paste on the shearing strength of the weld spot;
无铅焊膏中松香含量对焊点剪切强度的影响
3.
Study of the shearing strengths of marine sediment in the China’s mining region;
海底沉积物剪切强度的试验研究
4) shear bond strength
剪切强度
1.
Effect of different surface conditioning on shear bond strength of different types of luting cements to ceramics;
瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响
2.
Study of shear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;
光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定
3.
Comparative study on the shear bond strength of light-cured glass ionomer cement between etching and nonetching;
酸蚀对树脂加强型玻璃离子抗剪切强度的影响
5) shear bonding strength
剪切强度
1.
Evaluate of shear bonding strength of a self-etching adhesive to dentine in different conditions;
牙本质表面不同状态对自酸蚀体系剪切强度影响的实验研究
2.
Objective:The aim of the study was to investigate the effects of different etching time on shear bonding strength to guide its clinical use.
目的:研究不同酸蚀时间和不同施力方向对正畸托槽与牙面间剪切强度的影响。
3.
To investigate the effects of different surface conditioning methods on the shear bonding strength of glass-infiltrated ceramic to dentine, 24 glass-infiltrated ceramic testing-pieces were divided into four groups randomly.
用Super Bond与牙本质粘接 ,测其剪切强度。
6) first-crack strength
初裂强度
1.
Through the load-deflection curves of SFRC,the effects of fiber kinds and fiber content on the first-crack strength and the flexural toughness of SFRC were contrasted with those of concrete.
参照美国材料与试验协会(ASTM)试验方法,对满足超高距离泵送要求且抗裂性能优异的纤维混凝土的初裂强度和弯曲韧性进行了研究。
补充资料：层间剪切强度
分子式：
CAS号：
性质：层压件和纤维增强复合材料中层与层之间的最大剪切强度。作用于面上的应力与面相平行。其值较小。如树脂为环氧体系，增强材料为玻璃纤维时，纤维方向的拉伸强度达103MPa，而层间剪切强度为40～50MPa。
CAS号：
性质：层压件和纤维增强复合材料中层与层之间的最大剪切强度。作用于面上的应力与面相平行。其值较小。如树脂为环氧体系，增强材料为玻璃纤维时，纤维方向的拉伸强度达103MPa，而层间剪切强度为40～50MPa。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条