1) Pb-Ca-Sn-Ce alloy
Pb-Ca-Sn-Ce合金
1.
Anodic corrosion of Pb-Ca-Sn alloy and Pb-Ca-Sn-Ce alloy in H_2SO_4 solution(1.
应用阳极极化曲线法、阴极极化曲线法、室温析气实验及阳极恒流腐蚀,分别对Pb-Ca-Sn合金和Pb-Ca-Sn-Ce合金在1 28g/cm3硫酸介质中的耐腐蚀性能进行了测试,并对合金在硫酸中所形成的钝化膜进行了表面X射线衍射分析。
2) Pb-Ca-Sn alloy
Pb-Ca-Sn合金
3) Pb-Ca-Sn-Re alloy
Pb-Ca-Sn-Re合金
1.
The results showed that the corrosion-resistance property of Pb-Ca-Sn-Re alloy is better than that of tradditional Pb-Ca-Sn alloy,the growth of Pb(Ⅱ) compounds was inhibited in the film of Pb-Ca-Sn-Re alloy,and the film impedance of Pb-Ca-Sn-Re alloy was decreased,indicating that the conductivity of the film w.
应用交流阻抗,交流伏安和循环伏安等方法研究了Pb-Ca-Sn-Re合金和Pb-Ca-Sn合金在1。
4) Pb-Ca-Sn-Al alloys
Pb-Ca-Sn-Al合金
1.
Different content Bi was added into Pb-Ca-Sn-Al alloys for lead acid battery.
在铅酸电池用Pb-Ca-Sn-Al合金中添加不同量Bi,采用Tafel曲线、循环伏安和恒流放电等测试进行了板栅腐蚀、容量的研究。
5) Pb-Sn Alloy
Pb-Sn合金
1.
Solidification Structure of Pb-Sn Alloy in Rotating Magnetic Field;
旋转磁场作用下Pb-Sn合金的凝固组织
2.
Modeling of Non-isothermal Dendrite Growth in Pb-Sn Alloy;
非等温Pb-Sn合金枝晶生长的数值模拟
6) Sn-Pb alloy
Sn-Pb合金
1.
Bright Sn-Pb alloy electroplating technology with citric acid and EDTA as the complexing agent, and QB-1 as the additive was studied.
研究了以柠檬酸和EDTA为络合剂,QB-1为添加剂的电镀光亮Sn-Pb合金工艺。
2.
Concentrates of Hydroxyalkylsulfonates of Sn and Pb for Sn-Pb alloy electroplating developed and produced in China have been used by some factories in productin.
我国自行研制生产的羟基烷基磺酸电镀Sn-Pb合金镀液已经在部分厂家投产使用。
3.
Therefore, the Sn-Pb alloy loaded polymer composites have many special properties for their low melting point, which are not held by usual materials.
与通常的金属相比，Sn-Pb(Tm=183℃)合金具有较低的熔点，在通常的聚合物的加工温度窗口能够实现固态与液态之间的转变，因此如果选用Sn-Pb合金作为填料，制得的聚合物基复合材料能够在制备和使用的过程中实现刚性粒子和可变形液滴之间的转变，填料物态的转变会给复合材料带来一些特殊的性能。
补充资料：东北轻合金加工厂生产的铝合金挤压管材和空心材
东北轻合金加工厂生产的铝合金挤压管材和空心材
睽铝合;;:;;;、:;产的
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条