1.
Grain Boundary Character Distributions of Rolled and Annealed Pb-Ca-Sn-Al Alloy;
Pb-Ca-Sn-Al合金轧制退火晶界特征分布研究
2.
Effects on Recovery Treatment After Cold Rolling on Grain Boundary Character Distribution of Subsequently Strain-annealed Pb-Ca-Sn-Al Alloy
冷轧后回复处理对Pb-Ca-Sn-Al合金后续轧制退火晶界特征分布的影响
3.
Fabrication and properties of Pb-Sn-Al laminated composite electrode materials
Pb-Sn-Al复合电极的制备及其性能初步研究
4.
The Reversibility of Liquid-liquid Structural Change of Pb-Sn、In-Sn and Pb-Bi Alloys;
温度诱导Pb-Sn、In-Sn和Pb-Bi合金液—液结构转变的可逆性
5.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
6.
Research on Effects of Electric Pulse on Pb-Sn Alloy Molten;
电脉冲对Pb-Sn合金熔体作用研究
7.
Influence of Magnetic Field on Lamellar Eutectic of Pb-Sn Alloy
磁场对Pb-Sn合金层状共晶生长的影响
8.
Process for Electroplating of Pb-Sn-Cu Ternary Alloy Coating
Pb-Sn-Cu合金共沉积工艺研究
9.
Cutting Performance of Al-Mg-Si Alloy
Sn、Bi对Al-Mg-Si合金切削性能的影响
10.
Preparation and Properties of Polymeric Composites Filled with Sn-Pb Alloy;
Sn-Pb合金聚合物基复合材料的制备与性能研究
11.
Preparing Al-20%Sn Alloy by Mechanical Alloying Combining Cold Compacting and Sintering
机械合金化结合冷压烧结工艺制备Al-20%Sn合金
12.
Development of Cold Gas Dynamic Sprayed Al-Pb Alloy Coatings;
冷气动力喷涂Al-Pb合金涂层的研究
13.
Effect of Al on Microstructure and Mechanical Properties of Pb-Mg Alloys
Al对Pb-Mg合金组织与力学性能的影响
14.
Effects of Electrolyte Additives on Behavior of Al-In-Ga-Pb Alloy Anode
添加剂对Al-In-Ga-Pb合金阳极行为的影响
15.
Exploration of Temperature-induced Liquid-Liquid Structure Transition of Sn-Zn and Pb-In Alloy;
Sn-Zn及Pb-In合金的温度诱导液—液结构转变研究
16.
Effects of rotating magnetic field on microstructure and properties of Pb-Sn-Sb ternary alloys
旋转磁场对Pb-Sn-Sb合金组织及性能的影响
17.
Compressive Creep Behavior of Mg-Al-RE-Ca-Sr Alloy
Mg-Al-RE-Ca-Sr合金的压缩蠕变行为
18.
Effects of NaCl Aggradations on Corrosion Behavior of Mg-Al-Ca Alloy
NaCl沉积对Mg-Al-Ca合金腐蚀行为的影响