2) Orthogonal Design
正交设计试验法
1.
Studies on a High Sensitivity Reaction of Vanadium (Ⅴ) with Diantipyryl-(o-Ethoxy)-Phenylmethane (DAoEM) by Orthogonal Design;
正交设计试验法研究二安替比林邻乙氧基苯基甲烷与钒(Ⅴ)的高灵敏显色反应
3) orthogonal experiment
正交试验设计法
1.
The orthogonal experiment is used in Xinlin Sewage Water Treatment Plant.
采用正交试验设计法在厦门杏林污水处理厂进行试验 ,通过极差分析和方差分析确定污泥负荷和污泥龄是活性污泥法去除污水中有机污染物和磷的显著影响因素 ;其最佳操作条件为HRT =5h ,F/M>0 0 5kg (BOD5 ) /kg (MLSS) ;SRT =2 3-4 0d ,可生化比 >4 5,温度 =1 5-33℃。
2.
The orthogonal experiment was used in studying the process performance and membrane fouling during isoelectric supernate of monosodium glutamate was treated by bipolar membrane electrodialysis.
采用正交试验设计法研究双极膜电渗析处理味精等电母液时的过程性能和膜污染,连续5批试验,考察了操作电流、流速、温度和酸室初始浓度对电渗析性能(硫酸根的平均再生率、能耗总和)和膜污染(膜湿重及能耗增加量)的影响。
4) Orthogonal Design
正交试验设计法
1.
The terminal trajectory parameter optimization of trajectory correction projectiles was studied with orthogonal design.
使用正交试验设计法,对某弹道修正弹的末段弹道进行了弹道参数优化设计。
5) orthographic design method
正交试验设计法
1.
Shear strength of exterior reinforced concrete frame joint is analyzed with orthographic design method and code method,and the chief factors reviewed include the axial compression ratio,the concrete strength grade and yield strength of vertical reinforce.
利用正交试验设计法和现行规范方法对影响现浇钢筋混凝土框架外节点抗剪承载力的各因素进行分析,考虑的主要因素包括轴压比、混凝土强度等级、竖向钢筋屈服强度。
2.
Shear strength to reinforced concrete deep beams is analyzed through orthographic design method,and the factors reviewed included the shear span ratio,the concrete strength,the yield strength of horizontal reinforce,and the yield strength of vertical reinforce.
利用正交试验设计法对影响钢筋混凝土深梁抗剪承载力的各因素进行分析,考虑的因素包括剪跨比、混凝土强度、水平钢筋屈服强度和竖向钢筋屈服强度。
3.
Shear strength to reinforce concrete deep beam was analyzed by means of orthographic design method,robust design method and the improved robust design method,and the factors reviewed included the shear span ratio,the concrete compression strength,the yield strength of horizontal reinforce,and the yield strength of vertical reinforce.
利用正交试验设计法、稳健设计法及改进稳健设计法对影响钢筋混凝土深梁抗剪承载力的各因素进行分析,考虑的因素包括剪跨比、混凝土抗压强度、水平钢筋屈服强度和竖向钢筋屈服强度。
6) orthogonal experiment design method
正交试验设计法
1.
This paper adopts orthogonal experiment design method to arrange adjustment operating mode tests under three different electric loads.
分 3个不同负荷采用正交试验设计法设置调整工况 ,并安排了调整工况试验前后的习惯运行方式试验及优化工况试验。
2.
A method based on orthogonal experiment design method of generating software test case set is proposed,the basic conceptions of this method are introduced.
为了尽早地产生高质量的测试数据,将有限的测试资源进行合理的分配,提出了一种基于正交试验设计法(简称正交法)的软件测试用例生成技术。
补充资料：焦化试验室设计(见焦化厂试验室设计)
焦化试验室设计(见焦化厂试验室设计)
design of coking laboratory
J一aohua shiyanshi sheji焦化试验室设计(design of。oking laborato-ry)见焦化厂试验室设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条