1) orthogonal design
正交设计试验
1.
METHODS: By the orthogonal design.
方法：采用正交设计试验法，以挥发油收率、人参皂苷Ｒｅ收率以及合格颗粒收率为指标，优选油提、水提以及沸腾制粒工艺条件。
2) Orthogonal test design
正交试验设计
1.
Application of orthogonal test design in the optimization of recliner;
正交试验设计法在水泥预分解炉设计中的应用
2.
Parameter optimization based on orthogonal test design for transducer in Electrical Capacitance Tomography system;
电容层析成像系统传感器参数优化——基于正交试验设计法
3.
Layered sodium silicates was modified by orthogonal test design and the optimal modifying condition was found.
运用正交试验设计对层状硅酸钠进行了改性,确定了最佳的改性条件,并对改性层状硅酸钠进行了表征。
3) orthogonal experimental design
正交试验设计
1.
Studies on the polymerization of acrylic acid by orthogonal experimental design;
用正交试验设计法对丙烯酸聚合的研究
2.
An Analysis of Factors Causing Congestion with the Application of Orthogonal Experimental Design Method;
交通阻塞影响因素分析的正交试验设计方法
3.
On use of orthogonal experimental design;
正交试验设计表的使用分析
4) orthogonal design
正交试验设计
1.
Method: With the yield of ferulic acid as the assessment index,to optimize the 80% alcohol totalling,extracting times and circumfluence time for extract process by the orthogonal design,to optimize the inlet-air temperature,feed speed and density of feed for spry drying by the orthogonal design.
方法:以阿魏酸为评价指标,采用正交试验设计,对80%乙醇用量、提取次数和回流时间进行优选;采用正交试验设计,对喷雾干燥的进样速度、进风口温度和药液相对密度进行优选。
2.
METHODS The study was carried out using orthogonal design.
方法:以阿昔洛韦利用率为考察指标,通过正交试验设计法筛选工艺条件;采用X 射线衍射、差示扫描量热法验证包合物。
3.
In order to select the better ratio of different adjuvants the experiment was conducted by the orthogonal design.
采用流点法初步选定氰·莠 (氰草津·莠去津 )水悬浮剂润湿分散剂组份 ,通过分散剂含量与粘度曲线确定其较佳用量 ,在此基础上利用正交试验设计方法以常温贮存分层率和悬浮率为指标对润湿分散剂、粘度调节剂组份及其配比进行优选 ,确定了较佳配方并进行了贮存稳定性和除草效果验证。
5) orthogonal test
正交试验设计
1.
The orthogonal test was adopted to acquire the optimum technology for processing Fructus Evodiae with Radix Glycyrrhizae.
方法:采用HPLC法测定吴茱萸碱和吴茱萸次碱的含量,以两种生物碱总含量为评价指标,采用正交试验设计确定最佳甘草制吴茱萸的炮制工艺。
2.
Then by using orthogonal test,these important factors were optimized.
利用Plackett-Burman设计筛选出影响盐生盐杆菌(Halobacteriumhalobium)B培养条件的重要因素,然后利用正交试验设计对这些重要因素加以优化。
3.
By way of piston material analysis and the design of the friction welded joint,the friction welding procedure was optimized by the orthogonal test,and the friction welding parameter were obtained and used in small-batch production.
通过对活塞材料的分析和焊接接头的设计,运用正交试验设计对焊接工艺规范进行了初步优化,进行了小批量的生产验证,并对焊接件进行了相关检测和后续加工。
6) Orthogonal Design
正交设计试验法
1.
Studies on a High Sensitivity Reaction of Vanadium (Ⅴ) with Diantipyryl-(o-Ethoxy)-Phenylmethane (DAoEM) by Orthogonal Design;
正交设计试验法研究二安替比林邻乙氧基苯基甲烷与钒(Ⅴ)的高灵敏显色反应
补充资料：焦化试验室设计(见焦化厂试验室设计)
焦化试验室设计(见焦化厂试验室设计)
design of coking laboratory
J一aohua shiyanshi sheji焦化试验室设计(design of。oking laborato-ry)见焦化厂试验室设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条