1) stagnation ablation test
电弧驻点烧蚀
1.
The results show that 3D C/C composites have good ablation performance in the stagnation ablation test.
采用电弧驻点烧蚀试验方法,测试细编穿刺毡增强体C／C复合材料的烧蚀率,并采用电子扫描显微镜观察烧蚀表面形貌。
2) stagnation point ablation
驻点烧蚀
1.
The ablative performance of C/C composites with different carbon matrix was investigated by stagnation point ablation test.
本文利用电弧驻点烧蚀实验考察了三种具有不同碳基体的毡基C/C复合材料的抗烧蚀性能。
3) non-stagnation point ablation
非驻点烧蚀
4) arc ablation
电弧烧蚀
1.
For improving the arc ablation resistance of nozzle materials of high-voltage circuit breaker,it is needed to fill Al 2 O 3 and TiO 2 in PTFE to reduce the ablation of arc energy and improve the arc ablation resistance of nozzle.
为了提高高压断路器喷口材料的耐电弧烧蚀性能,采用在聚四氟乙烯(PTFE)中添加三氧化二铝或二氧化钛,降低电弧能量对PTFE的烧蚀,同时试验研究复合聚四氟乙烯介电性能的变化规律。
5) arc erosion
电弧烧蚀
1.
It is found by XRD that the phase structure of La2NiO4 ceramics did not change after arc erosion and exhibited a high chemical stability.
X射线衍射分析发现La2NiO4陶瓷在电弧烧蚀作用下相结构不发生变化,具有高的化学稳定性。
2.
After cryogenic treatment,the resistance property of arc erosion of CuCr50 vacuum contact material change dramatically.
CuCr50真空触头材料经深冷处理后 ,抗电弧烧蚀性能明显提高。
3.
The samples of carbon sliding panel infiltrated with copper were prepared,and the friction test and arc erosion test were carried out.
制备了浸铜碳滑板试样,并通过试验研究了浸金属碳滑板和纯碳滑板的机械摩擦性能与电弧烧蚀性能。
6) micro-arc ablation
微电弧烧蚀
补充资料：驻泊点
驻泊点
naval ship harbour station
zhubodiQn驻泊点(naval ship harbor station)具有保障设施，供舰艇驻泊的一段海(江河)岸及其毗连的水域、陆域。主要的驻泊点，通常是海军基地或军港的一部分或全部。按驻泊舰艇的不同，分为驱逐舰驻泊点、扫雷舰驻泊点、潜艇驻拍点、导弹艇驻泊点、勤务舰船驻泊点等;按主要功能，分为主要驻泊点、临时驻泊点、预备驻泊点、机动驻泊点等。主要驻泊点，通常有:天然或人工的避风浪条件;码头、防波堤、护岸等水工建筑物;通信、导航、物资、技术、医疗保障及人员训练、生活等设施;指挥、保障机构及其所属分队，能实施指挥、管理和遂行各种保障。有的还设有防御配系。临时驻泊点，设施简单或基本没有设施。预备驻泊点，一般在战前按任务选址，预筑设施，或顶选民港备用，平时不驻泊舰艇。机动驻泊点，一般使用便于机动的制式器材或就便器材临时开设。中国人民解放军海军曾将舰艇部队驻泊和临时停泊地点划分为驻泊点、停泊点、补给点三类。 (梁鑫)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条