1) P-A additional moment effect
P-△附加弯矩
2) additional bending moment
附加弯矩
1.
Overpass calculate examples and (analysis,)the distinguishing condition is introduced that additional bending moment is neglected to calculate the (maximum) normal stress of combined deformation practically.
分析了轴向力对压弯构件弯曲变形的影响,导出了压弯构件的附加弯矩和最大弯矩的一般表达式。
2.
The article discusses the pile foundation stability of piled wharf and determination of calculated length and additional bending moment of piles.
探讨高桩码头桩基的稳定与确定桩计算长度、附加弯矩的问题,提出排架各桩顶水平弹性系数的分配方法,使高桩码头桩基可分解为桩顶带水平弹簧、转角为固定或自由的单桩计算,探讨了确定桩计算长度需要考虑的一些因素,提出设计建议取值并与建筑规范进行了比较,分析了建筑规范存在的问题,提出如何考虑桩的水平力或水平位移计算桩的附加弯矩等问题。
3.
Through analysis on cracks in the slabs of a factory building, this paper regards it necessary to consider the effect of additional bending moment caused by beam deflection in slab smictural design of me lorg - span steel rein fored concrete fram structure factory building.
通过对某厂房板裂缝的分析，说明对某些大跨度的现浇钢筋混凝土框架厂房，在板的结构设计时须考虑梁产生的挠度所引起的附加弯矩的影响。
3) additional moment
附加弯矩
1.
The effects of friction moment and additional moment on the stability of rolls for the first time was considered and the optimum offset model for the four high mills was set up.
首次考虑摩擦弯矩和附加弯矩对辊系稳定性的影响，建立了四辊轧机辊系最佳偏移距模型。
2.
Meanwhile,the deduction of unified equations of various beam-columns additional moments and the discussion of the effects that factors of sorts exert on additional moments are also performed.
利用压弯构件的弹性曲线微分方程,分析了轴向压力对压弯构件弯曲变形的影响,导出了各种压弯构件附加弯矩的统一算式。
4) add-moment
附加弯矩
1.
Based on theory analysis of the rolling coupling and roller coupling, it is known when rolling coupling axis direction displacement, radial displacement and angle error are compensated, the rollers are rolling on the rolling path and the abrasion of rolling is slight, the friction force and the add-moment and power consume are small which will not influence the equipment performance.
对滚动联轴器与滚珠联轴器性能进行了分析,当补偿轴向位移、径向位移和角偏差时,滚动联轴器的滚动体在滚道上滚动,产生很小的摩擦阻力、附加弯矩和功率损失,对设备性能的影响很小,具备使用寿命长,传动效率高,维修方便等优点。
6) additional bending moment on derrick boom
吊杆附加弯矩
补充资料：△4-1,2,3,6-四氢化酞酐、△4-四氢苯酐
分子式：
CAS号：
性质：又称△4-1,2,3,6-四氢化酞酐、△4-四氢苯酐。白色结晶性粉末。熔点103～104℃(顺式)，闪点157℃，相对密度1.20。微溶于石油醚、乙醚，溶于乙醇、丙醇、氯仿和苯。遇水分解成酸。具腐蚀性。用熔融的顺丁烯二酸酐与丁二烯在苯存在下进行双烯加成反应制得。作为有机合成中间体，用于制取农药克菌丹、敌菌丹；也用作环氧树脂的固化剂、增塑剂及不饱和聚酯树脂、无溶剂漆的胶黏剂。
CAS号：
性质：又称△4-1,2,3,6-四氢化酞酐、△4-四氢苯酐。白色结晶性粉末。熔点103～104℃(顺式)，闪点157℃，相对密度1.20。微溶于石油醚、乙醚，溶于乙醇、丙醇、氯仿和苯。遇水分解成酸。具腐蚀性。用熔融的顺丁烯二酸酐与丁二烯在苯存在下进行双烯加成反应制得。作为有机合成中间体，用于制取农药克菌丹、敌菌丹；也用作环氧树脂的固化剂、增塑剂及不饱和聚酯树脂、无溶剂漆的胶黏剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条