1) MgO/SrTiO 3
MgO/SrTiO3
2) SrTiO 3
SrTiO3
1.
The rheological properties of SrTiO 3 suspersions and the effect of dispersant concentration on suspension stability are studied by meansof colloidal electrosteric stabilization mechanism.
本文采用胶体“电空间稳定机制”,以PMAA-NH4为分散剂,以沉降高度作为衡量浆料稳定性的参数,研究了SrTiO3粉末的悬浮流变特性及分散剂PMAA-NH4加入量对SrTiO3浆料稳定性的影响。
2.
The Electron Energy Loss Spectrum(EELS)of grain boundary composition of SrTiO 3 doped with Fe 3+ ,Nb 5+ was studied by using a high spatial resolution Scanning Transmission Electron Microscope(STEM).
采用高空间分辨率扫描透射电镜(STEM)对掺杂(Fe3+、Nb5+)SrTiO3晶界进行了观察,并利用采集的电子能量损失谱(EELS)对晶界组成进行了分析。
3.
Homoepitaxial SrTiO 3 thin film was grown by laser molecular beam epitaxy(LMBE) on SrTiO 3(100) single crystal substrates in ultrahigh vacuum(UHV).
在超高真空下利用激光分子束外延 (LMBE)方法基于SrTiO3 (10 0 )单晶基片同质外延SrTiO3 薄膜。
3) SrTiO_3
SrTiO3
1.
In this paper,the molecular dynamics method is adopted to simulate the melting process of SrTiO_3 with the interaction model of PIM.
采用分子动力学方法,势函数为PIM势,模拟了SrTiO3的熔化过程,将熔化的SrTiO3快速冷却到室温以获得非晶态。
2.
A SrTiO_3 single crystal (30mm×60mm) was successfully grown by the flame fusion method using SrTiO_3 powder hydrolyzed controllably from strontium chloride and titanium chloride.
本文以氯化锶和氯化钛为原料,采用控制水解法制备SrTiO3 原料粉末,使用焰熔法生长了SrTiO3 单晶体。
3.
In this paper, the making technology, ceramic composition and structure of a varistor-capacitor double properties chip component based on SrTiO_3 are described.
阐述了SrTiO3片式化压敏-电容双功能元件的制作工艺、陶瓷成分及结构,并讨论了陶瓷成分、结构及烧结工艺对元件压敏、电容性能的影响。
4) magnesium oxide
MgO
1.
The paper studied on the effect of different contents of magnesium oxide,basicity and Al2O3/SiO2to the strength and metallurgy performance of sinter.
研究了不同MgO含量、碱度及Al2O3/SiO2对烧结矿常温强度及冶金性能的影响。
2.
The influence of product and quality in sinter for the increasing magnesium oxide content to 3 per cent is analysed.
分析了萍钢将烧结矿中MgO含量提高至3。
3.
The catalytic performance of calcium oxide,magnesium oxide,lanthanum oxide,aluminium oxide and zirconium dioxide for the synthesis of salicylamide was examined.
以CaO、MgO、La2O3、Al2O3、ZrO2等5种金属氧化物为催化剂,以尿素和苯酚为原料直接合成了水杨酰胺。
5) magnesia
[英][mæɡ'ni:ʒə] [美][mæg'niʒə]
MgO
1.
Magnesium was reoxidated into magnesia in the process.
在热力学分析的基础上,研究了碳热还原硼铁矿过程中MgO的还原挥发过程。
2.
The price of Magnesia is far below Yttria, so considering the electric properties and the cost, the ZrO_2- Y_2O_3—MgO system has a stronger market competetion than the traditional Yttria stabled Zirconia system.
由于MgO的价格远低于Y_2O_3,因而从电性能/价格比角度而言,ZrO_2—Y_2O_3—MgO三元电解质材料较之于传统的Y_2O_3稳定ZrO_2材料具有更强的市场竞争力,是一个很有发展潜力的新系统。
3.
The purpose of the experiment was to analyze the effect of Magnesia on composition of the sinter mineral phase,when the content of MgO was different.
采用化学试剂配成不同MgO含量的原料,高温烧结,制成试样,对其进行观察,分析MgO成份对烧结矿矿相组成的影响。
6) CaTiO-3-SrTiO-3
CaTiO3-SrTiO3
补充资料:Mgo
氧化镁
氧化镁
产品名称 氧化镁
分子式 mgo
规格 95%
产地 上海
数量 不限
交货地点 本公司仓库
性质 白色轻松粉末,无臭、无味,暴露在空气中,容易吸收水份和二氧化碳,本品溶于酸和铵盐,不溶于水和乙醇,熔点2800,沸点3600,氧化镁有高度耐火绝缘性能。
用途 用于橡胶、塑料、电线、电缆染料、油漆、玻璃、陶瓷、化学试剂、医药、食品添加剂等。
包装 塑料编织袋内衬聚乙烯每袋净重20kg。
贮运 储存在干燥库房中,与潮湿性无机酸、强碱类物留隔储存,防止受潮,防止雨淋。
指标名称 指标
特级 一级 二级
氧化镁含量(%) > 95 93 -
灼烧矢量(%) < 3 4 -
氧化钙含量(%) < 1.0 1.2 -
盐酸不溶物含量(%) < 0.1 0.2 -
硫酸盐含量(以so4)(%) < 0.2 0.3 -
氯化物含量(以cl)(%) < 0.07 0.3 -
铁盐含量(以fe计)(%) < 0.05 0.06 -
筛余物(40孔/厘米) < 0.005 0.05 -
(%)(80孔/厘米) < 0.1 / -
视比容(毫升/克) > 7 6 -
上海瑞鸿化工有限公司
上海瑞鸿化工有限公司 版权所有(c)2002
设计制作 上海瑞鸿化工有限公司 网络支持 中化网络
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条