1) long water delivery tunnel
输水长隧洞
1.
Type selection of TBM for construction of long water delivery tunnel;
输水长隧洞TBM的类型选择
2) water diversion tunnel
输水隧洞
1.
Three-dimensional simulation analysis of structure of deep water diversion tunnel with TBM constructing;
深埋TBM施工输水隧洞结构的三维仿真分析
2.
Two water diversion tunnels are embedded in soft soil under road.
使用基于弹塑性增量理论的三维有限元方法,较细致地模拟了公路下输水隧洞近接沉箱桩施工的过程,并考虑了混凝土和注浆地层力学参数随龄期的变化,得出了一系列对设计和施工具有重要参考意义的结论。
3.
Construction of vertical shaft by means of freezing is a new attempt for water diversion tunnel construction.
冻结法竖井施工是水工隧洞施工竖井施工的一种尝试,本文通过冻结法对竖井冻结后施工过程和工艺的介绍及在神木县供水工程输水隧洞项目中的运用成功,可对以后利用冻结法解决复杂地质施工问题和冻结状态下竖井施工有所借鉴和帮助。
3) transporting water tunnel
输水隧洞
1.
Analysis and evaluation of stability of transporting water tunnel influenced by expressway;
高速公路对输水隧洞稳定性影响的分析与评价
2.
108 transporting water tunnels of Guanzhuang Reservoir,the reasons of the hidden safety trouble of the tunnel and some treatment measures are proposed.
醴陵市官庄水库92号、105号和108号的输水隧洞,在长期的运行中隧洞衬砌混凝土出现了裂缝、渗漏和蜂窝麻面,目前隧洞仍处于带病工作状态,存在较大安全隐患。
4) water conveyance tunnel
输水隧洞
1.
Treatment on collapse of water conveyance tunnel of Maliba Reservoir in Yunnan Province;
云南麻栗坝水库输水隧洞坍塌处理
2.
Construction features of a super long water conveyance tunnel project with large cross section in construction;
大断面超长输水隧洞的施工特点
5) water-conveying tunnel
输水隧洞
1.
In water-conveying tunnel of permanent shiplock of Three Gorges Project,some cracks are found in early phase cast concrete lining.
对衬砌混凝土施工期裂缝的原因进行了分析,指出了隧洞衬砌混凝土温控防裂的重要性,提出了一些可行的温控防裂措施,并在输水隧洞衬砌混凝土的后期施工中得到了应用,取得了良好的防裂效果。
2.
In order to study the rules of the temperature and stress changes in the concrete lining of water-conveying tunnel during construction period, simplified calculations of the temperature stress of the side-wall concrete lining are conducted based on the observation results of side wall concrete lining of water-conveying tunnel in Rosfa Water Project by using the fixed slab theory.
为了研究输水隧洞衬砌混凝土施工期的温度和应力变化规律 ,根据罗斯法水利枢纽输水隧洞衬砌混凝土边墙的温度观测成果 ,采用嵌固板理论对衬砌的混凝土边墙的温度应力进行了简化计算分析 ,得出了特殊点温度历时曲线和典型点应力历时曲线 ,并对衬砌混凝土的温度控制提出了一些有益的建议。
3.
During the earlier construction stage,lots of cracks occurred nearby 1/2 lengths of concrete lining of water-conveying tunnels of the permanent ship lock at Three Gorges Project.
三峡水利枢纽永久船闸输水隧洞早期施工的衬砌混凝土,有不少结构段在二分之一长度附近发生了裂缝,而且大多是贯穿性的,严重影响了工程质量和寿命。
补充资料：夹布输水胶管
分子式：
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条