1) compensation delay
补偿延时
1.
Study on the compensation delay and its countermeasure of active power filter;
有源电力滤波器补偿延时及对策的研究
2) delay compensation
时延补偿
1.
On Networked Control Systems Based on Delay Compensation and GPC Algorithm;
基于时延补偿和广义预测控制算法的网络控制系统研究
2.
To diminish the affection of delay the algorithm of time-delay compensation DMC(TDCDMC) is introduced.
仿真结果表明,这种改进算法的时延补偿性能良好,保证了控制的稳定性和快速性。
3.
Considering a class of networked control systems with time delays,a novel method was proposed to design Kalman filters with delay compensation,and it was used to estimate the state of the system.
考虑一类时延网络控制系统,提出了一种具有时延补偿功能的卡尔曼滤波器设计方法,并对系统进行状态估计。
3) time delay compensation
延时补偿
1.
For a network-based 2-DOF robot arm remote control system,an off-line and an on-line time delay compensation schemes were proposed respectively after analyzing the delay factors which affect the system performance,in order to make up for the delay of task-finished time from the remote control by contrast with the local control.
针对一个基于网络的二自由度机械臂的远程控制系统,通过对影响系统性能的延时因素的分析,提出了离线与在线的延时补偿方案,弥补了远程控制在任务完成时间上与本地控制相比所存在的延时;并通过实际系统的远程操控实验进一步证实了理论分析的正确性与控制策略的有效性。
4) delay compensation
延时补偿
1.
In order to study the effect of network delay and methods of delay compensation in the networked closed loop control systems,controller area network(CAN) bus is applied to servo control system to constitute a distributed control system with bus mode network topology.
为了深入研究闭环网络控制系统中延时对控制性能的影响和延时补偿方法,将控制器局域网(CAN)总线应用到伺服控制系统中,组成具有总线式网络拓扑结构的分布式控制系统,研究了该运动控制系统实验平台的总体组成和实现。
5) time delay compensation
时延补偿
1.
Discrete sliding mode control with time delay compensation for single input networked control systems;
单输入网络化控制系统的时延补偿滑模控制
2.
The system structure and the realization of vision feedback and time delay compensation are introduced.
文章详细介绍了系统的结构、视觉反馈及时延补偿的实现方法,并对所提出的时延补偿方法进行了测试。
6) time-delay compensation
时延补偿
1.
The estimation of image Jacobian matrix with time-delay compensation for uncalibrated visual servoing
带有时延补偿的图像雅可比矩阵估计方法
补充资料：M67式延时杀伤手榴弹
概述
m67式延时杀伤手榴弹是在ｍ３３式防御型手榴弹基础上改进而成的，与ｍ３３式不同之处是多了一个保险夹。目前，该弹作为美陆军标准手榴弹之一种，仍在装备使用，且主要用于防御作战时杀伤有生目标。
结构特点
ｍ６７式手榴弹由弹体和引信组成。球形弹体用钢材制成，内装ｂ炸药。引信为ｍ２１３式延期引信。引信保险机构上增加一保险夹，可防止保险销被意外拉出，从而避免事故的发生，保险夹呈ｓ形，用弹簧钢丝制成，一端套在引信体上，另一端夹住保险杆。使用时，卸掉保险夹后才能拔出保险销。
球形弹体是爆炸型弹最理想的弹体形状，弹体爆炸后破片分布均匀。
性能数据
弹径----63.5mm
全弹长----89.7mm
全弹质量----390g
弹体材料----钢
装药类型----b炸药
装药质量----180g
引信类型----m213式延期
延期时间----4～5s
有效杀伤半径----15m
投掷距离----40m
说明：补充资料仅用于学习参考，请勿用于其它任何用途。