1) thermal crack
热爆裂
1.
The process of impurity removing from fine silica powders with thermal crack method is investigated by means of DTA and XRD.
通过显微镜观察和X-射线衍射分析方法,研究用热爆裂法除去二氧化硅微粉中杂质的过程。
2) thermal explosive feature of quartz
石英热爆裂特征
1.
Study on the thermal explosive feature of quartz vein of Wenyu Gold Deposit and its marking significance to ore prospecting and evaluation;
文峪金矿床石英热爆裂特征及其找矿评价标志意义
3) thermal,spalling
热爆裂(由于制品中存在温度差产生应力而破裂)
4) thermal explosion
热爆
1.
Thermal Explosion of NiAl Intermetallic Compounds;
NiAl金属间化合物的热爆合成过程研究
2.
The composite materials of Al/Mg2Si with different Al contents are prepared by thermal explosion,the phases and microstructures of Al/Mg2Si are investigated by means of XRD and SEM,respectively,and the micro-hardness,porosity ratios of Al/Mg2Si material are imitated and analyzed.
通过热爆反应模式制备不同Al含量的Al/Mg2Si复合材料,用XRD研究产物物相组成,用SEM观察其微观组织形貌,并对复合材料的硬度和孔隙率进行了拟合分析。
3.
TiC/Ni_3Al products are created by thermal explosion reaction.
采用SEM和EDS分析对Ti-C-3Ni-Al体系热爆合成反应进行了研究。
5) Thermal explosion
热爆炸
1.
Random nature of thermal explosion criticality of exothermic system;
化学放热系统热爆炸临界值的随机性
2.
A calculation of the critrical parameters of thermal explosion for the finite cylinder of enegetic materials;
圆柱形含能材料热爆炸临界参数计算
3.
The method of thermal explosion temperature control blasting(TCB) seepage flow combustion(SFC) in underground coal gasification (UCG) was suggested, in light of the real problems of carrying out UCG in the dip, gently dip or nearly horizontal coal seams.
鉴于我国在倾斜、缓倾斜或近水平煤层中进行地下气化所遇到的实际问题 ,提出了煤炭地下气化热爆炸 -温控爆破渗流燃烧技术 ,简述了热爆炸基本原理 ,介绍了模型试验台结构、爆破参数设计、测试系统及冷态试验 ,并对试验结果进行了分析 。
6) Electro-thermal explosion
电热爆炸
1.
Performance of anti-corrosion and heat resistance of FeAl-based plasma spray coatings prepared by electro-thermal explosion method;
FeAl系电热爆炸喷涂层抗高温氧化腐蚀性能对比
2.
Three kinds of plasma spray coatings FeAl, FeCrAl and FeCrAlRE were prepared using instantaneous high-energy shock wave effect during electro-thermal explosion of FeAl conductor alloy foil.
利用金属导体FeAl系合金箔,电热爆炸产生的瞬间高能量冲击波效应,制备FeAl、FeCrAl、FeCrAlRE等离子体喷涂层。
3.
Prepare two kinds of plasma spray coatings:NiAl and NiCrAlRE,by using instantaneous high-energy shock wave effect produced by electro-thermal explosion of metal conductor alloy foil of NiAl base.
利用金属导体NiAl系合金箔,电热爆炸产生的瞬间高能量冲击波效应,制备NiAl、NiCrAlRE两种等离子体喷涂层。
参考词条
补充资料：爆裂
爆裂
bursting
b0Olie爆裂(b盯sting)管材生产中穿透管壁的突发性纵向开裂，通常出现在空拔管中。因为空拔后管材外表面存在较大的切向拉伸残余应力(见管材冷援变形原理)。管壁厚和气温低时发生空拔爆裂倾向更大。为防止纵裂缺陷，空拔时减径量不能过大，连拔道次要少，拔后应及时烘烤或退火。为防止钢管爆裂也可采用滚模拔制。(见管材冷轧冷拔) (李连诗)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。