1) Thermal Explorsion (TE)
热爆(TE)
2) BiTe material
Bi-Te热电材料
3) Solubilization by Thermophilic Enzyme(S-TE)
嗜热酶溶解(S-TE)
4) thermal explosion
热爆
1.
Thermal Explosion of NiAl Intermetallic Compounds;
NiAl金属间化合物的热爆合成过程研究
2.
The composite materials of Al/Mg2Si with different Al contents are prepared by thermal explosion,the phases and microstructures of Al/Mg2Si are investigated by means of XRD and SEM,respectively,and the micro-hardness,porosity ratios of Al/Mg2Si material are imitated and analyzed.
通过热爆反应模式制备不同Al含量的Al/Mg2Si复合材料,用XRD研究产物物相组成,用SEM观察其微观组织形貌,并对复合材料的硬度和孔隙率进行了拟合分析。
3.
TiC/Ni_3Al products are created by thermal explosion reaction.
采用SEM和EDS分析对Ti-C-3Ni-Al体系热爆合成反应进行了研究。
5) explosive heat
爆热
1.
Effects of components of fuel-rich boron-based solid propellant on burning rate in low pressure and explosive heat were investigated by measuring its burning rate with standard burner method and explosive heat with calorie meter of oxygen bomb.
采用推进剂静态燃速测试仪和氧弹式量热器的试验方法 ,研究了各组分对含硼富燃料推进剂低压燃速和爆热的影响。
2.
The solid propellant ageing will cause descent of its energy characteristic such as the burning rate, explosive heat.
固体推进剂的老化,会使其燃速、爆热值下降,势必会影响固体火箭发动机的内弹道性能,从而影响导弹的正常飞行。
6) explosion heat
爆热
1.
The effects of ultra-fine Fe_(2)O_(3) powder size on the explosion heat of trinitrotoluene;
超细氧化铁对TNT炸药爆热的影响
2.
A reference material for calibrating and verifying the calorimeter of propellant explosion heat is composed of nitrocellulose(NC),nitroglycerine(NG),centralite and vaseline.
采用硝化棉、硝化甘油、中定剂和凡士林为火药爆热热量计检定用标准物质的组成成分,通过生产工艺优化制备出该标准物质。
3.
Using the primary reference material as benchmark to compare the certified value mode, the error source and effect factors of standard value of propellant explosion heat reference material are analyzed.
采用了以高一级标准物质为标准进行比较定值的方式,进而分析了火药爆热标准物质标准值的误差来源和影响因素,并评估了标准物质标准值的合成标准不确定度和扩展不确定度。
补充资料：爆热
分子式：
CAS号：
性质：又称定容燃烧热。lkg推进剂在初始温度为298K的惰性气体(或真空)中绝热定容燃烧变成温度为Tv的燃烧产物，该产物再冷却到298K，并假设没有发生二次反应和凝结放热，所放出的热量。爆热是表征推进剂燃烧时放出化学潜能的标志。放出热量愈多，意味着放出的能量愈大。
CAS号：
性质：又称定容燃烧热。lkg推进剂在初始温度为298K的惰性气体(或真空)中绝热定容燃烧变成温度为Tv的燃烧产物，该产物再冷却到298K，并假设没有发生二次反应和凝结放热，所放出的热量。爆热是表征推进剂燃烧时放出化学潜能的标志。放出热量愈多，意味着放出的能量愈大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条