1) lead paste
铅膏
1.
Formation mechanism and characterization of slurry lead paste;
拉浆铅膏的形成机理与表征
2.
The authors studied the effects of the following factors on initial starting performance of dry-charged batteries:grid alloy composition,physico-chemical performance of leady oxide;acid volume in paste,lead paste;pasting and curing of green plates.
作者通过一系列试验,从合金配方、铅粉理化性能、铅膏加酸量、涂板方式及生极板的固化对干荷电铅蓄电池的首次起动性能的影响进行了研究。
3.
Higher standards for environmental protection and higher quality standards to be met by the prepared paste have led to developing preparation processes for lead paste mixes under vacuum.
铅膏制备过程中对环保和铅膏质量的更高要求促使真空和膏技术的发展。
2) paste
[英][peɪst] [美][pest]
铅膏
1.
A study on theory and method for preparation of paste;
铅膏制备原理与方法的研究
2.
By improving the formula of paste and plate processing the battery cold cranking,charge acceptance and storage performance have been increased,and the batteries are capable of meeting demands of motor cycle makers both at home and abroad.
通过改进铅膏的配方及极板的独特处理工艺 ,提高了干电荷电摩托车电池的低温高率放电性能、充电接受能力和储存性能 ,完全可以满足国内外摩托车主机厂的各种要求。
3.
The components,characteristics an d manufacture method of three kinds o f paste for lead-acid battery are introduced.
介绍了用于铅酸蓄电池正极板的3种铅膏的组份、特点和制造方法。
4) scrapped Pb-battery
铅泥膏
1.
This article introduces the experiment of treating Cr(VI) wastewater using of Pb-mud which consist in scrapped Pb-battery.
用废铅蓄电池中的铅泥膏进行含铬(Ⅵ)废水处理的实验。
5) paste formula
铅膏配方
1.
Effects of paste formula and mixing process on the performance of VRLA batteries;
VRLA蓄电池的极板铅膏配方及和膏工艺对蓄电池性能的影响
6) paste density
铅膏密度
1.
Effect of positive paste density and tin content of grid on cycling life;
正极铅膏密度和板栅锡含量对循环寿命的影响
2.
The active material porosity measuring method and the relation between paste density and porosity;
活性物质孔率的测定方法及孔率与铅膏密度的关系
补充资料：铅膏
分子式：
CAS号：
性质：由铅粉、水、硫酸和添加剂混合搅拌并发生物理、化学变化而制成的可塑性膏状混合物。含有氧化铅、碱式硫酸铅、金属铅、氢氧化铅、水和添加剂。将其涂填在板栅上或挤灌于管子中分别制造铅酸蓄电池涂膏式极板或管式极板。
CAS号：
性质：由铅粉、水、硫酸和添加剂混合搅拌并发生物理、化学变化而制成的可塑性膏状混合物。含有氧化铅、碱式硫酸铅、金属铅、氢氧化铅、水和添加剂。将其涂填在板栅上或挤灌于管子中分别制造铅酸蓄电池涂膏式极板或管式极板。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条