2) friction and wear mechanism
磨损机理
1.
And the friction and wear mechanisms were also discussed.
采用粉末冶金方法制备了ＳｉＣ颗粒增强铁基复合材料，考察了ＳｉＣ颗粒含量与铁基粉末冶金复合材料的显微组织、相对密度、力学性能及磨损性能之间的关系，并探讨了其摩擦磨损机理。
3) wear mechanisms
磨损机理
1.
The wear mechanisms of 45 are mainly abrasive wear and adhesive wear.
磨损机理主要为磨粒磨损和粘着磨损。
2.
In this paper,category ization\,tribology properties and wear mechanisms of heat resistance polymer composites are reviewed.
本文综述了耐温聚合物基复合材料的种类、摩擦学性能和磨损机理。
4) wearing mechanism
磨损机理
1.
Research on the Wearing Mechanism of TiN-coated Tools for High-speed Turning & Milling with Water-soluble Coolant;
湿式高速车铣时TiN涂层刀具的磨损机理研究
2.
Research on Wearing Mechanism of Ceramic Tool in High Speed Dry Turning and Milling;
干式高速车铣时金属陶瓷刀具磨损机理研究
3.
A study on wearing mechanism and Finite Element Analysis of centrifugal slurry pump;
离心式渣浆泵叶轮磨损机理研究及强度的有限元分析
5) abrasion mechanism
磨损机理
1.
Cutting properties and abrasion mechanism of Ti(C,N) cermet cutters;
Ti(C,N)基金属陶瓷刀具切削性能及磨损机理
2.
The morphology of the grinding crack was observed by SEM,and the abrasion mechanism was analyzed.
对涂层进行摩擦磨损试验,利用扫描电镜观察陶瓷涂层的磨损表面形貌,并分析其摩擦机制得出:涂层的耐磨性呈梯度变化;在不同的摩擦层面存在着粘着磨损、磨粒磨损、疲劳磨损等多种不同的磨损机理。
3.
Furthermore,the worn surface of nano-composite electroformings and their abrasion mechanism were investigated.
利用SEM分析了纯镍铸层,以及用直流和脉冲工艺所制备N i-ZrO2纳米复合电铸层的表面形貌,研究了直流条件下镀液中纳米颗粒悬浮量对纳米复合电铸层在干摩擦状态下耐磨性的影响,并对纳米复合电铸层磨损表面的形貌和磨损机理进行了探讨。
6) wear mechanism
磨损机理
1.
Research on Wear Mechanism of Conical Twin-screw;
锥形双螺杆磨损机理研究
2.
The tribology property and wear mechanism of the PEEK multiple composite under different rotate speeds;
PEEK多元复合材料在不同转速下的摩擦学性能和磨损机理
3.
Influence of alloy on impact corrosion wear mechanism of low carbon high alloy steel;
合金对低碳高合金钢冲击腐蚀磨损机理的影响
补充资料：表面磨损
分子式：
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条