1) stainless steel current collector
不锈钢集流板
1.
It was found that the contact resistance between the stainless steel current collector and graphite plate after embedding a metal net-carbon polymer composition is effective by to eliminate,Fuel cell testing has presented that this new method can effectively reduce the internal resistance of PEMFC,and improve the performance of the PEM fuel cell.
电学方法(电压降法)测试-数学模型分析表明,在不锈钢集流板和石墨单极板间嵌入金属拉伸网-碳胶聚合物复合体可消除金属集流板与石墨单极板间的接触电阻,从而能够有效降低燃料电池的内阻,提高燃料电池的性能。
2) stainless steel plate
不锈钢板
1.
Discussion on the service life of rolling oil filter of cold mill for stainless steel plate;
不锈钢板冷轧机轧制油过滤器寿命探讨
2.
In this paper,the new welding procedure is introduced to weld plates with stainless steel plates instead of composite ones.
针对船舶钢结构工程修理中的复合板换新问题,文章提出以不锈钢板替代复合板进行焊接的焊接工艺,通过焊接工艺评定后进行现场焊接,焊接结果符合检验标准。
3.
Welding 3 mm thick stainless steel plate by using CO2 laser-TIG hybrid welding, the effects on welds width and penetration by welding parameters was studied based on multiple linear regression method.
采用CO2激光-TIG复合焊接3mm厚的不锈钢板,基于多元线性回归方法,研究了焊接工艺参数对焊缝熔宽及熔深的影响。
3) stainless steel
不锈钢板
1.
This paper describes the method and processing parameters of laser welding of 8 mm thick stainless steel with high power Nd∶YAG CW laser.
探讨了采用高功率Nd∶YAG连续激光器焊接 8mm厚不锈钢板的工艺方法及工艺参数。
2.
This thesis to the wiredrawing stainless steel plate curtain wall application principle,main point of design and the construction control carried on a brife narration.
本文对拉丝不锈钢板幕墙的应用原理,设计要点和施工控制进行了简要叙述,拉丝不锈钢板幕墙做为一种新的装饰材料和工艺,较强的耐腐蚀和强度性能,将得到更广泛的应用和发展。
4) stainless steel sheet
不锈钢板
1.
The influence of different laser-spot spaces on deformation results of SUS304 stainless steel sheet was studied,and simulated by Finited Element Soft-ABAQUS.
实验研究了不同的光斑间距对SUS304不锈钢板激光冲击的变形影响,并用ABAQUS软件进行了有限元仿真分析。
2.
The FEM simulation of spring-back of stainless steel sheet s cold-roll forming process is investigated using anisotropic yield functions(Hill,YLD 89),and comparing the results with the experiments data.
基于不锈钢板冷弯成型和回弹过程的数值模拟,研究了各向异性屈服准则Hill和YLD89对不锈钢板冷弯成型模拟的影响。
5) stainless steel plate material
不锈钢板料
1.
In traditional process,1Cr18Ni9Ti stainless steel plate material needs to be drawn several times.
传统工艺中,1Cr18Ni9Ti不锈钢板料需多次拉深加工,其生产周期长、产品成本高、生产效率低。
6) stainless steel platen
不锈钢压板
补充资料：椭圆集流管板废热锅炉
分子式：
CAS号：
性质：是一种双重管(即套管式)锅炉，其结构特点在于上下管板均与椭圆管相焊接，椭圆管的一端与内管相接，另一端与外管连接。裂解气走管内，水走管外。内外炉管因温度不同而膨胀时，可由椭圆管吸收膨胀，根据椭圆形截面集流管的连接方式不同，schmidt锅炉分直排和同心圆排列两种。主要用于乙烯装置高温裂解气的热回收。
CAS号：
性质：是一种双重管(即套管式)锅炉，其结构特点在于上下管板均与椭圆管相焊接，椭圆管的一端与内管相接，另一端与外管连接。裂解气走管内，水走管外。内外炉管因温度不同而膨胀时，可由椭圆管吸收膨胀，根据椭圆形截面集流管的连接方式不同，schmidt锅炉分直排和同心圆排列两种。主要用于乙烯装置高温裂解气的热回收。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条