1) stainless steel pipe board
不锈钢管板
1.
Corrosion proof overlaying welding for the 0Cr18Ni9 stainless steel pipe board;
0Cr18Ni9不锈钢管板的耐蚀堆焊
2) stainless steel plate
不锈钢板
1.
Discussion on the service life of rolling oil filter of cold mill for stainless steel plate;
不锈钢板冷轧机轧制油过滤器寿命探讨
2.
In this paper,the new welding procedure is introduced to weld plates with stainless steel plates instead of composite ones.
针对船舶钢结构工程修理中的复合板换新问题,文章提出以不锈钢板替代复合板进行焊接的焊接工艺,通过焊接工艺评定后进行现场焊接,焊接结果符合检验标准。
3.
Welding 3 mm thick stainless steel plate by using CO2 laser-TIG hybrid welding, the effects on welds width and penetration by welding parameters was studied based on multiple linear regression method.
采用CO2激光-TIG复合焊接3mm厚的不锈钢板,基于多元线性回归方法,研究了焊接工艺参数对焊缝熔宽及熔深的影响。
3) stainless steel
不锈钢板
1.
This paper describes the method and processing parameters of laser welding of 8 mm thick stainless steel with high power Nd∶YAG CW laser.
探讨了采用高功率Nd∶YAG连续激光器焊接 8mm厚不锈钢板的工艺方法及工艺参数。
2.
This thesis to the wiredrawing stainless steel plate curtain wall application principle,main point of design and the construction control carried on a brife narration.
本文对拉丝不锈钢板幕墙的应用原理,设计要点和施工控制进行了简要叙述,拉丝不锈钢板幕墙做为一种新的装饰材料和工艺,较强的耐腐蚀和强度性能,将得到更广泛的应用和发展。
4) stainless steel sheet
不锈钢板
1.
The influence of different laser-spot spaces on deformation results of SUS304 stainless steel sheet was studied,and simulated by Finited Element Soft-ABAQUS.
实验研究了不同的光斑间距对SUS304不锈钢板激光冲击的变形影响,并用ABAQUS软件进行了有限元仿真分析。
2.
The FEM simulation of spring-back of stainless steel sheet s cold-roll forming process is investigated using anisotropic yield functions(Hill,YLD 89),and comparing the results with the experiments data.
基于不锈钢板冷弯成型和回弹过程的数值模拟,研究了各向异性屈服准则Hill和YLD89对不锈钢板冷弯成型模拟的影响。
5) stainless steel tube
不锈钢管
1.
Progress in backing weld technology for stainless steel tubes;
不锈钢管打底焊接工艺的进展
2.
Corrosion inhibition performance of different stabilizers on stainless steel tubes in condenser;
不同水质稳定剂对凝汽器不锈钢管的缓蚀性能
3.
Comprehensive assessment and selection of water treatment chemicals for stainless steel tube condensers;
不锈钢管凝汽器用水处理剂的综合评价与筛选
6) Stainless steel pipe
不锈钢管
1.
Welding Procedure of Red Copper Pipe and Stainless Steel Pipe Butt Welding;
紫铜管与不锈钢管对接焊焊接工艺
2.
Forming process and design of die for the welding arc-shaped end of stainless steel pipe;
不锈钢管焊接弧口成形工艺与模具设计
补充资料：不锈钢板
分子式：
分子量：
CAS号：
性质：按制法分热轧和冷轧的两种，包括厚度0.5-4毫米的薄板和4.5-35毫米的厚板。按钢种的组织特征分为5类：奥氏体型、奥氏体-铁素体型、铁素体型、马氏体型、沉淀硬化型。要求能承受草酸、硫酸-硫酸铁、硝酸、硝酸-氢氟酸、硫酸-硫酸铜、磷酸、甲酸、乙酸等各种酸的腐蚀，广泛用于化工、食品、医药、造纸、石油、原子能等工业，以及建筑、厨具、餐具 、车辆、家用电器各类零部件。为了保证各类不锈钢板的屈服强度、抗拉强度、伸长率和硬度等力学性能符合要求，钢板交货前必须经过退火、固溶处理、时效处理等热处理。
分子量：
CAS号：
性质：按制法分热轧和冷轧的两种，包括厚度0.5-4毫米的薄板和4.5-35毫米的厚板。按钢种的组织特征分为5类：奥氏体型、奥氏体-铁素体型、铁素体型、马氏体型、沉淀硬化型。要求能承受草酸、硫酸-硫酸铁、硝酸、硝酸-氢氟酸、硫酸-硫酸铜、磷酸、甲酸、乙酸等各种酸的腐蚀，广泛用于化工、食品、医药、造纸、石油、原子能等工业，以及建筑、厨具、餐具 、车辆、家用电器各类零部件。为了保证各类不锈钢板的屈服强度、抗拉强度、伸长率和硬度等力学性能符合要求，钢板交货前必须经过退火、固溶处理、时效处理等热处理。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条