1) ultrasonic radial vibration
超声径向振动
1.
The ultrasonic radial vibration mode of a thin elastic disc with linear thickness varying along the radial direction is studied,and the equivalent circuit is obtained by using electromechanical analogy method.
研究了厚度沿半径方向线性变化的盘形聚能器的超声径向振动,导出了其机电类比等效电路图。
2) Radial vibration sandwiched piezoelectric ultrasonic transducer
径向振动夹心式压电超声换能器
3) ultrasonic vibration
超声振动
1.
Study on the Design of Ultrasonic Vibration Internal Grinding System Shaft Based on FEM;
基于有限元的超声振动内圆磨削系统的主轴设计与研究
2.
Surface Characteristics of Cemented Carbides Machined by Ultrasonic Vibration Assisted EDM in Gas Medium;
超声振动辅助气体介质电火花加工硬质合金表面裂纹特性
3.
Gas Flow Field Simulation During Ultrasonic Vibration Assisted Gas Medium EDM Based on Fluent Software;
基于Fluent的超声振动-气体介质电火花加工气体流场模拟
4) ultrasonic vibrations
超声振动
1.
Effect of Ultrasonic Vibration on Crystalline Morphology of Polyolifen——Fineness by Ultrasonic Vibrations;
超声振动对聚烯烃结晶形态的影响——超声细化
2.
First, the author introduced different ultrasonic vibration devices; then, the author mainly described the influences of ultrasonic vibrations on polymer extrusion process and product properties.
描述了超声振动技术在聚合物挤出成型过程中的典型应用方式及其研究结果,重点阐述了挤出模头中引入超声振动后,超声振动对聚合物熔体挤出过程及制品结构性能的影响。
5) supersonic vibration
超声振动
1.
Research on mechanism of membrane separation process under the role of supersonic vibration;
超声振动强化膜分离过程机理的研究
2.
In the processing of the hard tooth face gear, in order to reduce the cost and promote the development of the gear honing technique, the supersonic vibration was applied in the gear honing process, that is the supersonic vibration gear honing of the hard tooth face parallel axes.
在硬齿面齿轮加工中,为了降低成本并促进珩齿工艺的发展,把超声振动应用于珩齿工艺中,即硬齿面平行轴超声振动珩齿。
6) radial vibration
径向振动
1.
Coupling computation on radial vibration of chamber structure and internal ballistic property for solid rocket motor;
固体火箭发动机燃烧室结构径向振动与内弹道性能的耦合计算
2.
Analysis on the resonance frequency of a thin piezoelectric ceramic disk in radial vibration;
径向振动压电陶瓷薄圆盘振子的机电等效电路与共振频率研究
3.
Study on the radial vibration of a new type of radial composite piezoelectric ceramic ultrasonic transducers;
一种新型径向复合压电陶瓷超声换能器径向振动特性研究
补充资料：径向伸缩振动模式
分子式：
CAS号：
性质： 薄圆片压电振子在外加交变电场作用下，产生沿半径方向的伸缩振动。它是中频，高频下常用的振动模式之一。极化方向与厚度方向平行、与电极面垂直。振子的振动方向和波传播方向均与半径方向平行。谐振频率与直径成反比。常采用边测量谐振频率、边磨振子外径的方法来修正频率。
CAS号：
性质： 薄圆片压电振子在外加交变电场作用下，产生沿半径方向的伸缩振动。它是中频，高频下常用的振动模式之一。极化方向与厚度方向平行、与电极面垂直。振子的振动方向和波传播方向均与半径方向平行。谐振频率与直径成反比。常采用边测量谐振频率、边磨振子外径的方法来修正频率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条