1) neutral point pulse width injection method
中性点脉宽注入法
1.
The feasibility of applying neutral point pulse width injection method in the location of single phase grounding fault occurred in railway automatic blocking and continuous power transmission lines is analyzed.
分析了中性点脉宽注入法在铁路自闭贯通输电线路单相接地故障定位中应用的可行性。
2) neutral point injected signal
中性点注入信号
1.
After presenting the principle of neutral point pulse width injection methods,the choosing methods of neutral point injected signal and the neutral point connecting resistance are discussed;a simulation model is built and the influences of the loads of transmission lines and various transition resista.
在介绍中性点脉宽注入法原理的基础上,讨论了中性点注入信号和中性点接入电阻的选取方法;建立了仿真模型,对线路所带负荷、不同过渡电阻对中性点脉宽注入法的影响及该方法对供电的影响进行了分析。
3) neutral beam injection
中性束注入
1.
This system has been applied successfully to experiment and preliminary experimental results are acquired,which also provides a reliable guarantee for later related physical experiments of neutral beam injection.
系统成功地应用于实验并获得初步实验结果,为以后中性束注入开展相关物理实验提供可靠保障。
2.
The data acquisition system for neutral beam injection applied in national great science engineering HT-7 was designed.
设计了应用于国家大科学工程HT-7的中性束注入数据采集系统。
3.
Low-temperature thermometer calibration system to liquid helium cryopump for neutral beam injection;
研制了一套适用的低温温度计标定系统 ,并用比较分度方法对铑铁温度计进行标定 ,其标定精度满足了中性束注入系统的技术诊断要
4) neutral beam injector
中性束注入
1.
To balance the unmatched state of the neutral beam injector and HT-7 device in Tokamak,a cryopump is mounted in the drift tube of neutral beam injector.
在T okam ak实验装置中,为了改善中性束注入器和HT-7装置内的真空度不匹配的状况,在漂移管道内放置了一台低温冷凝泵。
2.
Neutral Beam Injector (NBI) is a device which produces high energy ion beam, neutralizes it to high energy neutral beam for tokamak plasma heating.
中性束注入器(Neutral Beam Injector,简称NBI)是能产生高能带电离子束并对其进行中性化形成高能中性粒子束用以加热托卡马克等离子体的装置。
3.
Neutral Beam Injector (NBI) is a device which produces high energy ion beam,neutralizes it to high energy neutral beam for tokamak plasma heating.
中性束注入器(Neutral beam injector,NBI)是产生高能带电离子束并对其进行中性化形成高能中性粒子束用以加热托卡马克等离子体的装置。
5) NBI
中性束注入
1.
Research on Temperature Measurement and Control System for NBI;
中性束注入装置温度测控系统研究
2.
Neutral beam (NB) heating is one of the effective auxiliary heating means in the research on magntically controllable nuclear fusion, for which an 1MW NBI (netural beam injection) system has been constructing.
介绍了中性束注入系统热测靶的测量原理 ,提出了热测靶的设计方案 ,并对测量误差进行了分析 ,介绍了中性束注入系统束线上束流功率和功率密度分布的测量方法 ,对中性束注入系统也作了简单介
3.
The article primary introduces composing of HT-7 Neutral Beam Injection (NBI) system, then mainly analyzes gas target thickness, that is pressure distribution of neutralizer gas cell, one of factors which affect heating efficiency of NBI.
本文首先介绍了HT-7中性束注入(NBI)加热系统的组成，然后对影响中性束注入加热效率因素之一的气体靶厚度即中性化室的压力分布进行了重点分析。
6) injection neutral beam
注入中性束
补充资料：点对点法
分子式：
CAS号：
性质：发射光谱分析中，将金属试样制成两个锥体状电极，分别作为光源的上下电极，彼此相对以电弧或火花法进行激发摄谱。该法因无辅助电极，所摄光谱中可无其伴存谱线。
CAS号：
性质：发射光谱分析中，将金属试样制成两个锥体状电极，分别作为光源的上下电极，彼此相对以电弧或火花法进行激发摄谱。该法因无辅助电极，所摄光谱中可无其伴存谱线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条