2) LRB bridge
LRB桥梁
3) isolated bridge
隔震桥梁
1.
Earthquake response analysis of isolated bridge structures under the multiple seismic ground motion inputs;
多维地震动作用下隔震桥梁结构的地震响应分析
2.
Research on displacement-based non-iterative design method for the isolated bridge;
基于位移的隔震桥梁非迭代设计方法研究
3.
Shaking table experiment study of bridge isolation system (IV) exploration on design method of isolated bridge;
桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨
4) bridge seismic isolation
桥梁隔震
1.
To develop an ideal bearing for bridge seismic isolation,mechanical properties tests on square lead rubber bearings are conducted,and the experimental data are in agreement with the rubber bearings theoretical formulae analysis results,which can provide references to design square lead rubber bearings.
为开发出能更好适用于桥梁隔震的支座,对方形铅芯橡胶支座进行了力学性能试验,并与铅芯橡胶支座力学参数理论公式计算的结果进行了对比,吻合较好,从而为方形铅芯橡胶支座的设计提供依据。
5) bridge isolation
桥梁隔震
1.
Shaking table test study of bridge isolation system (III)──An analysis of measured results;
桥梁隔震体系振动台试验研究(III)——测试结果分析
2.
Shaking table test study of bridge isolation system (Ⅱ) ──An introduction to main measured results;
桥梁隔震体系振动台试验研究(Ⅱ)——主要测试结果介绍
3.
Shaking table test study of bridge isolation system(Ⅰ) ──Test Significance and model design;
桥梁隔震体系振动台试验研究(Ⅰ)──试验意义与模型设计
6) isolated bridges
隔震桥梁
1.
The responses of lead rubber bearings(LRB) isolated bridges impacted by over-height trucks are worth further research.
采用线性弹簧碰撞单元,用ANSYS有限元软件建立了超高车辆-桥梁的碰撞模型,对LRB隔震桥梁受到超高车辆正向撞击时的整体响应进行了非线性时程分析。
2.
In order to investigate the nonlinear seismic responses of isolated bridges with lead rubber bearings (LRB) under multi-directional horizontal earthquake excitation, Bouc-Wen model of LRB under two horizontal orthogonal directional excitation is adopted.
为了研究铅芯橡胶支座(LRB)隔震桥梁在双向水平地震激励下的非线性地震反应,首先用Bouc-Wen模型模拟水平正交两向作用力条件下LRB支座非线动力行为的双向恢复力特性。
补充资料：隔震制品
分子式：
CAS号：
性质：亦称橡胶防震、隔震制品。用于消除或减少机械震动的传递，达到减震、消音及减少冲击所致危害的橡胶制品统称橡胶减震制品。其中包括橡胶减震器、橡胶缓冲器(块、垫)、橡胶连接件、空气弹簧及橡胶护舷等。为纯橡胶或带织物、金属骨架增强的橡胶产品，一般用模压法制造。广泛用于房屋建筑、机械设备、车辆、舰船和仪表等行业。
CAS号：
性质：亦称橡胶防震、隔震制品。用于消除或减少机械震动的传递，达到减震、消音及减少冲击所致危害的橡胶制品统称橡胶减震制品。其中包括橡胶减震器、橡胶缓冲器(块、垫)、橡胶连接件、空气弹簧及橡胶护舷等。为纯橡胶或带织物、金属骨架增强的橡胶产品，一般用模压法制造。广泛用于房屋建筑、机械设备、车辆、舰船和仪表等行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条