1) laminated beam
叠梁
1.
Erection method of laminated beams of boiler structure;
锅炉构架叠梁的安装工艺
2.
Theoretical analysis and experimental research of laminated beam
叠梁理论分析与试验研究
3.
In order to accurately analyze the differences on load carrying ability among laminated beam,laminated beam with wedges and beam as a whole of the same dimension,this paper sets up a model of flection of laminated beams with rectangular cross section by taking advantage of Winkle s foundation assumption method and electric testing technique.
为了精确分析叠梁、加楔块叠梁和整梁的承载能力,采用温克尔假设法和电测实验技术,完成了矩形截面叠梁受力弯曲时的模型简化理论计算与实测分析。
2) laminated beam
叠层梁
1.
Calculation formulas for stress of laminated beam under bending experiment
叠层梁弯曲实验的应力计算公式
2.
A composite laminated beam is considered to be in a state of plane stress,the analytical solutions of frequencies and modal functions of a composite orthogonal and anisotropic laminated beam with simply-supported boundary condition are obtained by elasticity theory.
用平面应力模型来模拟复合材料叠层梁,得到了正交各向异性叠层梁的频率和模态函数,并用间接模态叠加法(IMSM)求得了叠层梁的瞬态响应。
3.
Based on generalizing the structure characteristics of bridge asphalt pavement,the laminated beam model is developed as for bridge asphalt pavement.
在分析总结桥面铺装结构承载特性的基础上,提出采用叠层梁作为桥面沥青铺装层间应力计算的简化模型。
3) steel composite beam
钢叠合梁
1.
The rebuilding scheme fully considers the harmony of the whole bridge with the surrounding environment, meets the planned traffic function requirements and the relative technical standards, puts forward the design of the steel composite beam structure for the main bridge and the technical measures taken for the sunk shaft foundation treat.
该文在对广州市增埗大桥既有桥梁结构安全性评价的基础上,提出增埗大桥改造方案?脑旆桨赋浞挚悸亲芴逵?周围环境的协调,满足规划交通功能要求及相关技术标准,提出主桥钢叠合梁结构设计、旧桥沉井基础处理所采取的技术措施,着重分析设计的重点、难点,可供类似工程借鉴。
4) composite beam
叠合梁
1.
Experimental research on the shearing resistance strength of oblique section of composite beam;
叠合梁斜截面抗剪性能的试验研究
2.
Experimental study on bending behavior of composite beams with invertible T-shaped prestressed precast beam;
倒T形预应力预制构件叠合梁受弯性能试验研究
3.
Calculation of normal section crack resistance of prestressed concrete composite beams with U-shaped precast beam;
U形预制截面预应力混凝土叠合梁正截面抗裂验算
5) method of composite beam
叠合梁法
6) simply supported laminated beam
简支叠梁
1.
A simple analytical model for simply supported laminated beams is established based on the characteristic of beams under stress.
针对简支叠梁的受力特点,建立简支叠梁的简化分析模型,对简支叠梁之间的接触力分布提出假设,运用变形协调条件推导出接触力函数,并对接触力函数的有效性进行了讨论。
补充资料：叠梁闸门
叠梁闸门
stop log gate
根插入门槽以封闭水道孔口的闸门，也称插板(见图)。制造叠梁闸门的材料有木材、钢材和钢筋混凝土等，目前多半用在中小型水工建筑物上作为检修闸门。叠梁闸门构造简单，制作方便，但接缝较多，漏水量较大，操作也较麻烦。20世纪70年代发展了一种浮式叠梁闸门，是四周密封的箱形梁，可利用浮力减少门重，在水面上利用挂钩梁操作，较为方便。(夏念凌)叠梁闸门d ieliang zhamen叠梁闸门(stop109 gate)由若干根独立的横梁逐
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条