1) jet flow

出流水舌

Based on the continuity equation and the energy equation in hydromechanics,a computing formula about outflow angle of jet flow on the slit-type bucket is proved.

分析了影响窄缝挑坎水流的出射角的各种因素,确定了水流出射角计算公式中参数的计算方法,从而能够计算直墙窄缝挑坎出流水舌的出射角。

2) outflow

出流

On the point of view of economy,the most two popular outflow volume of induction sanitary ware were analyzed and compared in this paper.

从节能的角度,对感应式小便器目前主要采用的两种出流方案进行了分析比较,根据2005年数学建模题的相关数据,建立了两个模型,用matlab求出了各方案出流时间设计参数T的最优值,并在此基础上,对感应式小便器的出流时间进行了优化设计,给出了一套既节水又卫生的流水方案。

The outflow through gate controlled multi opening spillway of Yinhe Reservoir was analyzed.

分析了音河水库多孔有闸门控制的溢洪道出流，并用出流的实测资料进行了检

Inflow and outflow boundary conditions for the method were given t.

针对此方法,给出了一种来流和出流边界条件的提法。

3) extrution flow channel

挤出流道

4) Large orifice discharge

大孔出流

The results showed the gating system which is according to proportional solidification, the large orifice discharge theory with blind feeder and iron chill has avoided defects of heavy ductile iron castings.

简述了某一曲轴连杆铸件的结构特点,采用顺序凝固理论和均衡凝固理论设计两种工艺方案,通过对比,结果表明,运用大孔出流,均衡凝固理论设计的浇注系统,采用暗冒口配合冷铁工艺,可以有效解决厚大球铁件生产中的铸造缺陷。

Considering of the problems exist in practice,large orifice discharge principle is employed to study the pressure distribution of ring runner system,the even ablity for discharging of gates,the relationship of flow with the position of sprue and the type of gates.

根据生产中存在的问题 ,用大孔出流理论研究了环形横浇道系统的压力分布、内浇道出流均匀性及流量与直浇道引入位置和内浇道引入方式之间的关系 ,提出了圆形铸件环形横浇道系统新的设计思

In the paper,based on the Propotional Solidification Theory and Large Orifice Discharge Theo- ry,the foundry technology of gray iron casting shell was designed by the method of CAD.

论文根据均衡凝固及大孔出流理论,用计算机辅助设计的方法改进了壳体灰铸铁件的铸造工艺。

5) designing outflow volume

出流方案

According to the date of the mathematical model contest of 2005,three models were established,using the mathematical tool Matlab,the optimal of designing outflow volume time T were given.

6) Multi-outlet discharge

多口出流

参考词条

自由出流孔口出流横向出流闸孔出流输出流量出流特性雨天出流驶出流率出流环量支出流向出流孔出流流态淹没出流出流角 f不变分布

补充资料：产后舌出

产后舌出

产后舌出　　病证名。出戴武承《女科指南集》。据《灵枢·经脉》等篇载述，舌通数经之气：足太阴脾经连舌本，散舌下；足少阴之脉挟舌本；手少阴之别系舌本；足厥阴之脉络舌本。产后元神虚惫，少阴（心经）厥阴（肝经）大败，经脉失养，导致舌出不收。治宜于舌上外涂朱砂末，内服保元汤。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引挤出流动重力出流出流系数产出流体事故出流出流孔+

1) jet flow 出流水舌 1. Based on the continuity equation and the energy equation in hydromechanics,a computing formula about outflow angle of jet flow on the slit-type bucket is proved. 分析了影响窄缝挑坎水流的出射角的各种因素,确定了水流出射角计算公式中参数的计算方法,从而能够计算直墙窄缝挑坎出流水舌的出射角。 2) outflow 出流 1. On the point of view of economy,the most two popular outflow volume of induction sanitary ware were analyzed and compared in this paper. 从节能的角度,对感应式小便器目前主要采用的两种出流方案进行了分析比较,根据2005年数学建模题的相关数据,建立了两个模型,用matlab求出了各方案出流时间设计参数T的最优值,并在此基础上,对感应式小便器的出流时间进行了优化设计,给出了一套既节水又卫生的流水方案。 2. The outflow through gate controlled multi opening spillway of Yinhe Reservoir was analyzed. 分析了音河水库多孔有闸门控制的溢洪道出流，并用出流的实测资料进行了检 3. Inflow and outflow boundary conditions for the method were given t. 针对此方法,给出了一种来流和出流边界条件的提法。 3) extrution flow channel 挤出流道 4) Large orifice discharge 大孔出流 1. The results showed the gating system which is according to proportional solidification, the large orifice discharge theory with blind feeder and iron chill has avoided defects of heavy ductile iron castings. 简述了某一曲轴连杆铸件的结构特点,采用顺序凝固理论和均衡凝固理论设计两种工艺方案,通过对比,结果表明,运用大孔出流,均衡凝固理论设计的浇注系统,采用暗冒口配合冷铁工艺,可以有效解决厚大球铁件生产中的铸造缺陷。 2. Considering of the problems exist in practice,large orifice discharge principle is employed to study the pressure distribution of ring runner system,the even ablity for discharging of gates,the relationship of flow with the position of sprue and the type of gates. 根据生产中存在的问题 ,用大孔出流理论研究了环形横浇道系统的压力分布、内浇道出流均匀性及流量与直浇道引入位置和内浇道引入方式之间的关系 ,提出了圆形铸件环形横浇道系统新的设计思 3. In the paper,based on the Propotional Solidification Theory and Large Orifice Discharge Theo- ry,the foundry technology of gray iron casting shell was designed by the method of CAD. 论文根据均衡凝固及大孔出流理论,用计算机辅助设计的方法改进了壳体灰铸铁件的铸造工艺。 5) designing outflow volume 出流方案 1. According to the date of the mathematical model contest of 2005,three models were established,using the mathematical tool Matlab,the optimal of designing outflow volume time T were given. 从节能的角度,对感应式小便器目前主要采用的两种出流方案进行了分析比较,根据2005年数学建模题的相关数据,建立了两个模型,用matlab求出了各方案出流时间设计参数T的最优值,并在此基础上,对感应式小便器的出流时间进行了优化设计,给出了一套既节水又卫生的流水方案。 6) Multi-outlet discharge 多口出流参考词条自由出流孔口出流横向出流闸孔出流输出流量出流特性雨天出流驶出流率出流环量支出流向出流孔出流流态淹没出流出流角 f不变分布补充资料：产后舌出产后舌出产后舌出　　病证名。出戴武承《女科指南集》。据《灵枢·经脉》等篇载述，舌通数经之气：足太阴脾经连舌本，散舌下；足少阴之脉挟舌本；手少阴之别系舌本；足厥阴之脉络舌本。产后元神虚惫，少阴（心经）厥阴（肝经）大败，经脉失养，导致舌出不收。治宜于舌上外涂朱砂末，内服保元汤。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com