1) consolidation velocity
固结速率
1.
According to the one-dimensional Terzaghi’s consolidation theory,the relationship between the consolidation velocity and time is deduced,which could be used to propose a new method for evaluating the analytical solution of the coefficient of consolidation.
基于太沙基一维固结理论,推导了固结速率与固结时间的解析关系,为固结系数的求解开辟了新方法。
2) rate of consolidation
固结固结速率
3) rate of secondary consolidation
次固结速率
4) solidification rate
凝固速率
1.
The empirical results indicate that the increase of solidification rate can achieve intermetallic particles reinforced phase with ideal morphological features in Al-Ni alloy.
实验结果表明,提高凝固速率可以使Al-Ni合金获得理想形貌的金属间化合物强化相。
2.
Exporimental results show that the stress- rupture life of DZ22 at 980℃ and 220 MPa was increased from 71 hours and 50 nunutes to 168 hours and 5 minutes at relatively high solidification rate.
本文采用ＺＭＬＭＣ超高梯度定向凝固法（ＺＭＬＭＣ法），研究了两种凝固速率下ＤＺ２２合金的高温力学性能和组织。
3.
The dendritic arm spacings and microsegregations of directionally solidified superalloy DZ22 at various solidification rates have been studied with the help of a ZMLMC directional solidification equipment.
采用新研制的超高梯度定向凝固装置，研究了不同凝固速率下定向凝固高温合金ＤＺ２２的枝晶臂间距和枝晶偏析。
5) curing rate
固化速率
1.
The influence of varieties and amount of photoinitiator,radiation distance,curing time,and structure of resins on UV curing rate is discussed.
将环氧大豆油与丙烯酸反应制备出环氧豆油丙烯酸酯预聚物,考察了光引发剂的种类、用量、辐射距离、时间及合成树脂的结构对光固化速率的影响,并利用红外光谱对树脂固化前后的结构进行了表征。
2.
It was proved by experiments that the fastest curing rate was reached for black UV-curable ink-jet ink with photointiator 2022.
选用7种光引发剂配制数码喷墨用黑色UV固化油墨,实验结果表明,使用光引发剂2022的固化 速率最快;当光引发剂与胺促进剂复配时,UV固化油墨的固化速率有较大提高。
6) colour fixation rete
固色速率
补充资料：固结
1.牢固团结。 2.凝结;郁结。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条