1.
The impurities present have an important effect on the rate of setting.
存在的杂质对凝固速率有很大的影响。
2.
RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS
压铸过程中铸件-铸型界面换热系数与铸件凝固速率的关系
3.
Effects of Cooling Rate on Solidification Structure of Zn-3.5Mg Alloy
冷却速率对Zn-3.5Mg合金凝固组织的影响
4.
Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel
冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响
5.
Microstructure of Al-Ni-Y Ternary Alloy with Directional Solidification Under Different Stretching Velocities
Al-Ni-Y三元合金不同拉伸速率的定向凝固组织
6.
Solidified structural characteristics of rapid solidified Sn2.5Ag0.7Cu solder alloy
快速凝固Sn2.5Ag0.7Cu钎料合金凝固组织特征
7.
Study on Co Free and over Stoichiometric AB_5 Type Hydrogen Storage's High Rate Discharge Performance;
快速凝固过化学计量比无钴AB_5型储氢合金高倍率放电性能的研究
8.
Effect of Drawing Rate on Microstructure Evolution of Ti-47.5Al-2Cr-2Nb-0.2B Alloys under Directional Solidification
抽拉速率对Ti-47.5Al-2Cr-2Nb-0.2B合金的定向凝固组织的影响
9.
EFFECTS OF WITHDRAWAL RATE ON MICROSTRUCTURE AND STRESS RUPTURE PROPERTIES OF A Ni_3Al-BASED SINGLE CRYSTAL SUPERALLOY IC6SX
拉晶速率对Ni_3Al基单晶合金IC6SX凝固组织和高温持久性能的影响
10.
EFFECT OF COOLING RATE ON γ' PRECIPITATE OF DZ4125 ALLOY UNDER HIGH THERMAL GRADIENT DIRECTIONAL SOLIDIFICATION
高温度梯度定向凝固冷却速率对DZ4125合金γ′相的影响
11.
Melt Spinning Processing Equipment and the Structure of Mg-5%Zn Alloy Produced by RSP;
单辊快速凝固装置与Mg-5%Zn合金快速凝固组织
12.
fixed frequency cyclotron
固定频率回旋加速器
13.
high natural frequency accelerograph
高固有频率自记加速计
14.
the quality of being characterized by a fixed principle or rate.
有固定的规则或速率。
15.
The Efficiency and Feasibility of Externally Bonded FRP Strengthening Concrete Bridge Girder;
外贴FRP加固混凝土桥梁的加固效率与可加固性
16.
INFLUENCE OF WITHDRAWING RATE TRANSITION ON THE PRIMARY DENDRITE ARM SPACING AND MICROSEGREGATION OF DIRECTIONALLY SOLIDIFIED SINGLE CRYSTAL SUPERALLOY DD3
抽拉速率跃迁对定向凝固单晶高温合金DD3一次枝晶间距和微观偏析的影响
17.
Rapid Solidification and Special Coating of Highly Undercooled DD3 Superalloy;
DD3高温合金的深过冷快速凝固及其快速凝固用特殊涂层
18.
Microstructure Evolution of Cu-12.58%Mg Hypereutectic Alloy at Constant and Abruptly Increasing Velocities in Directional Solidification
定向凝固恒速和跃迁加速下Cu-12.58%Mg过共晶合金的凝固组织演变