1) rate type
率型
1.
An implicit numerical integration algorithm is proposed for solving the implicit rate type hypoplastic constitutive equation.
针对亚塑性本构方程率型隐式的特点,推导了求解亚塑性本构方程的隐式数值积分算法,并对该算法做了进一步改进,引入自适应时间步长技术,在保证精度和收敛速度的前提下,通过合理选择时间步长,降低了计算时间,保证了该计算程序的可靠性。
2) probability model
概率模型
1.
Choice and Analysis of the Fracture Failure Probability Model of Pipelines;
管线断裂失效概率模型选取及分析
2.
Probability and non-probability model of laminated composite plate structures;
复合材料层合板结构的概率与非概率模型
3.
A new probability model for predication of equilibrium sand-bed height for liquid-solid two-phase flow in horizontal pipe;
水平固液两相管流平衡砂床高度计算的概率模型
3) probabilistic model
概率模型
1.
The concrete carbonating and analysis of probabilistic model;
概率模型分析与混凝土碳化
2.
Investigation on probabilistic model for fatigue-creep failure of alloy GH30;
GH30合金疲劳-蠕变概率模型的研究
3.
The Inference of probabilistic model of geotechnical parameters based on optimal numerical approximation method;
基于最佳数值逼近法的岩土参数概率模型推断
4) rate model
速率模型
1.
Research on the rapidity of convergence of the rate model of multi-component nonlinear liquid chromatography;
液相色谱速率模型收敛速度的研究
5) model calibration
模型率定
1.
It describes the necessary,objectives and design principle of NFFS s construction,and introduces the design and construction of the seven main parts of NFFS,including running environment,forecasting models and ways,forecasting schemes,model calibration and verification,real-time operating forecasting,utilized modules and system management in detail.
分析了我国洪水预报系统的现状,阐述了中国洪水预报系统的建设的必要性、目标及开发原则,介绍了中国洪水预报系统的软硬件环境、预报模型和方法、预报方案、模型率定、实时作业预报、实用模块、系统管理7部分的设计建设。
2.
In the process of model calibration,the no.
在模型率定过程中,首先利用多目标最优化方法获得模型参数的非劣解集,然后又利用离散型协调规划从非劣解集中选出满意的模型参数,最后通过对非劣解集模拟的过程线的范围及形状的分析,对模型的有效性进行了评价。
6) molding rate
成型率
1.
The surface wave of wire rope and the metal core of rope to be free to other place is due to molding rate too high,bigger fluctuation,uneven strand tension forces and clockwise stra.
对港机 -集装箱用钢丝绳主要品种在实际使用中存在的质量问题进行详细分析 ,认为抗疲劳性能差和使用寿命短的主要原因是钢丝韧性指标低、外层股之间的缝隙太小和钢丝绳油脂不到位 ;钢丝绳表面浪形和金属绳芯外逃是由于成型率过高、波动偏大 ,各股捻制张力不均匀和顺向捻制不到位。
补充资料:电导率(见电阻率)
电导率(见电阻率)
conductivity
d!日nd日O}已电导率(eonduetivity)见电阻率。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条