说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 数字波浪水槽
1)  numerical flume
数字波浪水槽
1.
A Bretschneider/Mitsuyasu spectrum wave was generated in a numerical flume,and the design of breakwater was in accordance with Code of Hydrology for Sea Harbour,China("the Code").
45的反射系数,将数值模拟的结果和规范中的反射系数进行了对比得出,数字波浪水槽有满意的精度以及在规范中使用了一定的安全系数,表明数字波浪槽在防波堤的预设计中有重要作用。
2)  numerical wave flume
数值波浪水槽
1.
The numerical wave flume of the viscous fluid based on the momentum source method;
基于动量源方法的黏性流数值波浪水槽
2.
Development of numerical wave flume based on SPH method
基于光滑质点流体动力学方法数值波浪水槽研究
3.
An idealized numerical wave flume has been established and its results,including wave profiles, time history of surface elevation and efficiencies of boundary conditions are discussed.
由于Navier-Stokes方程是从动量守恒定律出发,对不可压缩粘性流体不引入地形限制,不考虑水深影响,是真正意义上从流体的运动规律出发的方程,因此本文以Navier-Stokes方程为控制方程,用有限元法对它进行离散,建立了它的有限元特征方程,通过对边界条件的处理建立了适用广泛的二维数值波浪水槽,并就数值模型的稳定性、边界条件的效果作了探讨。
3)  numerical wave channel
数值波浪水槽
1.
The numerical wave channel has been developed based on the volume of fluid method (VOF).
本文应用VOF方法建立了二维数值波浪水槽模型。
2.
With the 2-D numerical wave channel model established by the VOF method,this paper calculated the wave transmission coefficient of the permeable piled wharf and compared it with the physical model experiment results,and those by the Wiegel & Kriebel formula.
应用VOF(Volume of Fluid Method)的二维数值波浪水槽模型,计算了某工程透空式高桩码头的透浪系数,并与实验结果及Wiegel,Kriebel公式计算结果进行了比较,为减小造波边界的二次反射影响,在数值波浪水槽左端设置了可吸收式造波机数值边界条件,数模得到的透空码头的透浪系数与实验结果吻合较好,与Wiegel、Kriebel等学者的理论公式计算结果一致。
4)  numerical wave tank
数值波浪水槽
1.
Application of source generation of waves in 3D fully nonlinear numerical wave tank;
源造波法在三维完全非线性数值波浪水槽中的应用
2.
Improvement on a 2D numerical wave tank;
一个二维数值波浪水槽的改进
3.
Nonlinear Numerical Wave Tanks and Their Applications;
非线性数值波浪水槽及其应用
5)  wave tank
波浪水槽
1.
Fully nonlinear three-dimensional numerical wave tank simulation;
三维完全非线性波浪水槽的数值模拟
6)  2D numerical wave flume
二维波浪数值水槽
补充资料:电热恒温水浴锅(水槽)

适用范围: 可供医疗单位、院校、科研、化工、印染等行业的化验部门做蒸馏、干燥、浓缩及恒温加热化学药品及生物用品等广泛用途。结构特点: 外壳采用优质冷轧钢板制成,表面喷塑处理,工作室顶盖圈均用不锈钢制成外壳与工作室间填充优质保温材料,结构设计合理,抗蚀性强,造型美观,温控系统采用较可靠的调节控制装置,感热性强,灵敏度高在使用范围内可任意调节,有棒调式数显式指针式三种,能直接测量工作室内实际水温,加热装置采用封闭式加热器,可直接浸入水中,热能损小。普通型棒调式:铟钢棒调节器结合箱子上的温度计来调节所需工作温度。-ⅱ型指针式:指针式控温仪显示设定温度和实际温度。-s型数显式:微电脑智能控温仪显示设定温度和实际温度。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条