说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 阻抗模值
1)  impedance magnitude
阻抗模值
1.
Gives the amendment of impedance magnitude and phase angle on AMN V-netwoks and analyses the rationale of the addition of impedance phase angle at low、medium and high frequencies.
给出了V型人工电源网络规范中对阻抗模值和相角修改的内容,并对人工电源网络使用频率范围中的低频、中频和高频增加相角规范内容的原理进行了详细分析。
2)  low frequency impedance
低频阻抗模值
1.
The results showed that low frequency impedance|Z|at a fixed frequency decreased with the increase of exposure time which and yielded time series function.
结果表明:随着暴露时间增加,一定频率下的低频阻抗模值|Z|下降,表现为时间的变化函数;傅立叶变换红外光谱(FTIR)分析表明,紫外暴露下发生高分子断链涂层降解,而在老化12天后|Z|值的升高可能与分子的重构变化有关;因而,EIS谱的|Z|值可作为一种较为有效的表征参数来反映UV老化后有机涂层的防护性能。
3)  value of acoustic impedance of ore
波阻抗值
4)  equivalent impedance
等值阻抗
1.
Presently in transformer model,it is considered mainly whether the equivalent impedance is assigned to the side of normal ratio,but seldom whether the equivalent impedance is on the side of on-load tap changer.
目前广泛使用的理想变压器串联一个恒定等值阻抗的变压器模型,一般只以等值阻抗是否位于变压器标准变比侧来区分,而没有考虑等值阻抗是位于可调分接头侧还是位于固定抽头侧的问题。
2.
To research the accuracy of the load model and its parameters being adopted in the dispatching department of central China power grid to guide the load modeling scientifically, the equivalent impedances of distribution networks of central China power grid are calculated by power system analysis software package (PSASP).
为探讨目前华中电网调度部门实际使用的负荷模型及其参数的准确性,指导科学建模工作,利用电力系统分析综合程序PSASP计算了华中电网各配电网的等值阻抗,仿真结果表明目前应用的等值负荷模型参数与实际情况有一定差距,配电网络结构、运行电压、等值阻抗处理方法等因素对负荷模型等值的准确性均有影响,利用仿真得到的负荷模型等值参数可减少电压稳定问题突出的电网所需要的稳定措施量。
3.
In off-line power flow studies, as the equivalent impedance of a transformer is directly given, it is not necessary to consider the effect of tap changer regulation on the impedance of a transformer when a transformer model is selected.
离线潮流计算中,变压器等值阻抗是直接给定的,因而使用变压器模型通常无需考虑变压器分接头对等值阻抗的影响。
5)  Impedance Peak
阻抗极值
1.
Analysis on Impedance Peak in RL—C Parallel Circuit;
RL—C并联电路阻抗极值的分析
6)  impedanoe ratio
阻抗比值
补充资料:星接阻抗和三角接阻抗的变换


星接阻抗和三角接阻抗的变换
transformation between starc-onnected and delta-connected impedances

x ing]一e乙日kongl介e sonJ一00}Iez日伙ongde匕一。一〕huon星接阻抗和三角接阻抗的变换(t ransfor-mation betweenstar一eonneeted and delta-eonneeted imPedanees)接成星形的三个阻抗和接成三角形的三个阻抗互相替代的等效变换。它们之间的关系可用一组变换公式表示。按这组公式,用星接阻抗替换三角接阻抗或者反过来,不会影响稳态下电路其他部分的正弦电压和电流,常用于对称三相电路的分析和计算。 图1为三个阻抗21、Z:、23接成星形(又称丫形)。图2为三个阻抗Z小22。、Zal接成三角形(又称△形)。它们之间的变换公式如下:人23土图1星接阻抗图2三角接阻抗(1)将星形连接变换成三角形连接212一Z:+22+2 122及3一22+za十警(1)、|冬|矛231一23+21+2321(2)将三角形连接变换成星形连接z、-二一典乒兴-) 艺‘2士乙“3十乙31…_2 oqZI,}Z。一下万~一二-二二-汁 乙‘2士乙23十乙3‘1_Z。IZoq}艺q一二二一~二,二二--,-二二-~J 乙12十乙23十艺32夕(2) 当三个星接阻抗相等,即21一Z:一23一z丫、三个三角接阻抗相等即212一223一231一Z△时,变换公式是 Z二一32丫,Z丫一Z△/3
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条