1) air uplift and control sediment
气动冲淤
2) pneumatic
气动
1.
Design of pneumatic arc core-pulling crank slide mechanism;
气动曲柄滑块圆弧抽芯机构设计
2.
Improving on the pneumatic system of DDS tapping machine;
DDS开铁口机气动系统的改进
3.
Control strategy of pneumatic integrated active and passive vibration isolator;
气动主-被动一体化隔振器控制策略分析
3) Pneumatic System
气动
1.
Study on and Design of Pneumatic System for NC Spiral Bevel Gear Burnishing Machine;
气动在数控螺旋锥齿轮研齿机中的应用研究
2.
Abstact:This article mainly introduced the improvement of DB420 pressing device of multi_function packaing machines and the regarding control methods of the pneumatic system and the electrical route.
本文主要介绍了DB420多功能包装机压印装置机械部分的改进及相应的气动、电路控制方法。
4) pneumatics
气动
1.
Design of web gravure press feeding pneumatics controlling system;
轮转凹印机给纸系统裁刀气动控制系统设计
2.
The Design of Computer Auto-sorting System Based on Pneumatics;
基于气动技术的计算机控制自动分拣系统
3.
In this paper the structure of the joint is presented, the principle of pneumatics and method of control are.
给出了关节的结构,介绍了手指关节的气动原理与控制方法,并分析了关节弯曲变形的静态模型。
5) Aerodynamics
气动
1.
Based on running features of feed-water pump turbine,design and exploit new last stage blade in order to fill the request of aerodynamics,intensity and vibration of feed-water pump turbine in running.
针对给水泵汽轮机的运行特点,设计开发新的末级叶片,以便满足给水泵汽轮机运行时气动、强度、振动要求。
2.
Theory and methodology of multidisciplinary coupling optimization design taking account of aerodynamics,heat transfer,structure,vibration and life prediction and optimum algorithm,were discussed.
叙及了多学科设计优化技术在航空发动机涡轮叶片设计中的应用研究,对涡轮叶片多学科设计优化方法进行设计的具体实施过程进行了介绍,讨论了结构、气动、传热、强度、振动和寿命以及优化算法等跨学科之间进行耦合优化设计的理论和方法。
6) aerodynamic
气动
1.
The present paper computational simulates the atomization characteristics of the aerodynamic nozzle,and analysis the flow in the nozzle,achieves some useful conclusions.
对气动喷嘴的雾化特性进行了数值模拟,对喷嘴内的流动现象进行了分析,得到了一些有益的结论。
2.
Using the combination of simulated annealing algorithm and second ordered planning algorithm of sequence,the blade optimization has been carried out by taking the aerodynamic efficiency of turbine as the target.
根据五次多项式叶片造型方法进行叶型参数化,得到涡轮叶片的参数化模型,采用N-S方程进行三维流场计算,使用模拟退火算法和序列二次规划算法相结合,以涡轮气动效率为目标进行了优化,优化结果显示涡轮气动效率得到提高。
3.
aerodynamic braking,wheel mounted disc braking and track friction braking.
介绍了悬浮式铁道机车车辆使用的 3种机械式制动装置 ,即气动制动、车轮圆盘制动与路面摩擦制动。
参考词条
补充资料:水利工程水力冲淤
水利工程水力冲淤
hydraulic sluicing sediment of water project
shuili gongeheng shuili ehongyu水利工程水力冲淤(hydraulie sluieingsediment of water Projeet)利用水力减少或清除水库、河道、航道和水闸等水利工程设施受水流泥沙作用所产生的淤积的措施。水利工程产生淤积是水土流失和河流输沙受阻、流速降低的直接结果。泥沙淤积,使工程效益降低,甚至失去作用。在工程规划设计时,即应采取各种防沙、冲淤措施。工程投入运行使用后,作好防沙、冲淤处理:是工程管理的主要内容之一。泥沙,一方面对水流运动有抗拒性;另一方面受水流作用又有可动性。流速小时泥沙淤积,流速大时发生冲刷。因此,改变水流条件、增大流速,利用水流清除泥沙淤积,是处理泥沙淤积的经济有效途径。 水库水力冲淤①蓄清排浑。根据河流来水来沙不平衡的特点,多沙河流水库,可采用“蓄清排浑”的运用方式。非汛期来沙少,采取蓄清拦沙运用;汛期来沙多,降低库水位(或敞泄)排沙。使水库年内冲淤基本平衡,保持一定的兴利库容,长期使用,以发挥综合利用效益。黄河三门峡水库,初期蓄水拦沙运用,1960年9月到1964年10月.高程朋。米以下库区淤积严重,后加大泄洪设施,并改为蓄清排浑运用,水库年内冲淤基本平衡。②异重流排沙。水库蓄水期间,当洪水具有产生异重流的条件时,洪水入库后,细颗粒泥沙将以异重流形式潜入库底向坝前运动。及时开闸泄流,可将部分入库泥沙排出库外。异重流排沙效果与洪水流量、含沙量、粒径组成,泄量、开闸时间及库区地形等因素有关。汛期调洪时,要加强异重流观测。当异重流到达坝前时,及时开闸,并随时调整泄量,以提高异重流的排沙效果。异重流排沙能力有限,一般只能缓和水库淤积的速度.不能解决水库淤积问题。③泄空排沙。在水库泄空过程中,回水末端逐渐向坝前移动,因而原来淤积的泥沙,将因回水下移,恢复自然河道而产生冲刷。在泄空的最后阶段,应加大泄量,使库水位骤降,以增大冲刷效果。水库泄空排沙,通过两种方式进行,即变动回水区以下的沿程冲刷及三角洲前坡和顶坡的溯源冲刷。沿程冲刷可消除回水末端的淤积;溯源冲刷,逐渐向上游发展,为冲刷的继续发展创造条件。中小型水库泄空冲刷过程中,可以利用人工或机械将主槽两侧的泥沙推进主槽,或在主槽内进行人工或机械搅动,均可增大泄空冲刷的排沙效果。④中小型水库水力吸泥。利用水库上下游水位差,将库内淤积泥沙吸出,排出库外,是清除水库淤积的一种排沙措施吸泥装置,由操作船、吸泥管路及吸头三部分组成。操作船拖着吸头在泥面上移动。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。