1) Chemical equipment
化工装备
1.
Modeling of chemical equipment configuration model based on axiomatic design theory and its application;
基于公理化设计理论的产品配置建模方法及其在大型化工装备中的应用
2.
The latest achievements of strueture ceramics and their applications were described in detail, some suggestions for chemical equipment made of struoture ceramics were proposed.
本文简要介绍了国内外工程陶瓷的研究、开发现状及其市场预测情况,并重点介绍了结构陶瓷在化工装备上应用的最新成果,最后对发展我国结构陶瓷制化工装备提出了建议。
2) chemical process equipment
化工过程装备
1.
Based on the analysis of chemical process equipments, the virtual manufacturing architecture for the chemical process equipments were discussed.
在分析化工过程装备特点基础上 ,对过程装备虚拟制造技术平台的体系结构进行了探讨 ,以典型过程装备螺旋片导流式气液分离器为例 ,对其数字化建模方法、数值仿真技术、虚拟设计和制造环境进行了研究。
3) Refinery Chemical Equipment
精细化工装备
4) technological equipment
工艺装备
1.
Green" design of the technological equipment for railway freight car manufacture;
铁路货车制造业工艺装备的绿色设计
2.
This paper concisely presents characteristics of technological equipment for Laigang 900-m3 blast furnace as well as the link-up treatment modes of old and new systems and expounds some defects in the course of the technical modernization with capacity expansion for the blast furnace,providing a conducive inspiration to the future B.
简要介绍了莱钢900m3高炉的工艺装备特点以及新旧系统接茬处理方式,同时对本次高炉扩容改造过程中一些不足之处也进行了阐述,为高炉今后设备管理以及操作规律的摸索乃至高炉大修建设提供了有益启示。
3.
explains its optimization designing of technol ogy, optimization combination of technological equipment and productive management.
按产品分类表述了工艺的优化设计、工艺装备及生产管理的优化组合方法。
5) process equipment
工艺装备
1.
The paper introduces process equipment and process parameters of caster No.
本文介绍了炼钢厂新建3#铸机的工艺装备与工艺参数,以及生产后在产量、质量、品种等方面所取得的效果。
2.
It shall be based on a set of reasonable and perfect process equipment, especially for stainless steel tube to tube-sheet.
该工艺的实施需要合理、完善的工艺装备作为基础 ,尤其对于不锈钢管与管板的连接。
3.
This paper presents briefly the principle of the UV irradiation cross\|linking, focusing on the process equipment and its influence on the product properties.
该文简要介绍了紫外光辐照交联的基本原理,着重介绍了紫外光辐照交联的工艺装备及其对产品性能的影响。
6) Construction Equipment
施工装备
1.
Base on the review of the technology development of borehole construction for mine gas drainage in China underground coal mines, the paper summarized the present status and appropriate conditions of the borehole construction equipment for mine gas drainage in coal mines and individually introduced the principle, technical features and applications of several borehole construction technologies.
在回顾我国煤矿井下瓦斯抽放钻孔施工技术发展的基础上,总结了现阶段煤矿井下瓦斯抽放钻孔施工装备的现状及适用条件,分别介绍了各种钻孔施工技术的原理、技术特点及应用情况,分析总结了我国煤矿井下瓦斯抽放钻孔施工装备和技术发展所面临的问题是如何实现水平长钻孔的准确定向,进一步延长钻孔的有效抽放段距离和有效抽采时间;如何提高松软突出煤层钻孔深度和有效成孔率,并提出未来发展趋势是履带一体化和随钻测量定向钻进技术和装备;松软突出煤层的瓦斯抽采关键技术及其装备;研制开发安全、可靠、有效的远程控制钻机及绿色产品设计思想。
2.
The paper introduced BJS-L50 construction equipment of deep mixing continuous underground wall on its structural features,technical specifications and performance parameters,analyzed the economical and social benefits with engineering cases.
论述了B JS-L50型深层搅拌地下连续墙施工装备结构特点、技术特性及性能参数,结合工程实践对其进行经济效益和社会效益分析,从而说明该装备较适合中国国情,易于推广,应用前景广阔。
补充资料:“基洛”级潜艇及潜艇装备
"基洛"级潜艇是俄罗斯红宝石设计局设计的常规动力攻击型潜艇。水面排水量2350吨,水下排水量3000吨。艇长73.8米,宽10米,高14.7米。最大下潜深度300米,工作深度240米,潜望镜深度17.5米艇员52人,自持力45天。动力装置:两台柴油机,一台推进电机和经航电机,七叶低噪声螺旋桨,单轴,装有两组蓄电池,每级120块,分别置于i舱和iii舱,功率2940千瓦(约4000马力)。水面航速11节,水下航速18节,最大航速可达20节,续航力为400海里。艇艏装有6个鱼雷发射管,可另携带12枚备用鱼雷。
中国海军的潜艇: 型号 排水量 数量
夏级(092) (8000吨) 4艘
汉级(091) (5000吨) 5艘
g级(6631) (2350/2950吨) 1艘
k级(kilo877/636) (2350/3000吨) 4艘
武汉a级(33g1) (1350/1700吨) 1艘
明级(035) (1500/1900吨) 10艘
宋级(039) (1700/2250吨) 2艘
r级(6633) (1350/1700吨) 103艘
w级(6603)(退出现役) (1080/1350吨) 15艘
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条