1) abrasion course
磨损历程
1.
Aimed at the abrasion of pins,some experiments were carried out and the abrasion course was analyzed,the abrasion course of pins is the breaking-in,the abrasion wear and adhesive abrasion.
通过大量试验,分析了装载机销轴磨损的历程,表明销轴的磨损历程主要分为磨合阶段、磨粒磨损阶段和粘结磨损阶段。
2) wear equation
磨损方程
3) wear process
磨损过程
1.
During the wear process of the clad coatings,the mechanically mixed layer (MML) were formed on the clad coatings when the SiC_p particles asperities cutting against the grinding wheel.
磨损过程中,该熔覆层中的SiCp颗粒微凸体对磨轮的切削产生的切屑,在熔覆层表面形成机械混合层(MML),此机械混合层硬度较高,耐磨性好,使熔覆层在磨损过程中经历了较长距离的磨损孕育阶段,从而改变了铝合金的磨损过程,延缓了中等磨损向严重磨损的转变。
2.
The change rules of the wear rate of rubber under the condition of a line contact in wear process are investigated,it shows that the wear rate of the rubber abrasion during initial stage is increased with the wear travel,after a certain stage the wear rate is constant and reaches to the steady stage of wear.
研究了天然橡胶、丁苯橡胶和丁腈橡胶在线接触条件下磨损过程中磨损率的变化规律，发现橡胶材料在磨损初期的磨损率随摩擦行程增大而增大，到达一定阶段后磨损率保持不变，进入稳定磨损阶段。
4) wear degree
磨损程度
1.
In addition,on the stagger arrangement condition,principle of transversal pitch selection and the difference in each column fin tube wear degree that induced by the different transversal pitch was also studied.
分析了翅片几何参数选取的不同对抗磨性能与换热的影响;此外,还研究交错排列情形下,横向节距的选取原则,以及不同的横向节距对每列翅片管磨损程度的差异。
5) wear
[英][weə(r)] [美][wɛr]
磨损过程
1.
This paper describes the deficiencies ofseveral popular modeling methods used in the normalwear trend modeling and presents a normal wear trendmodeling method based on Genetic Algorithms (GA).
分析了几种常见建模方法在正常磨损过程趋势建模中的不足,提出了基于遗传算法的正常磨损过程趋势建模方法。
6) wear rate equation
磨损率方程
补充资料：反应历程
分子式：
CAS号：
性质：又称反应历程。指化学反应过程中由反应物分子变为产物分子所经历的具体步骤。从宏观反应动力学的角度看，可将反应机理理解为一个总反应所包含的各个元反应的集合。探求一个总反应的机理，实际上就是探求这一总反应究竟包括哪些元反应以及它们按怎样的序列进行。从微观反应动力学角度看，反应机理指微观的基元化学物理反应的详细经过，此反应机理也称分子机理。
CAS号：
性质：又称反应历程。指化学反应过程中由反应物分子变为产物分子所经历的具体步骤。从宏观反应动力学的角度看，可将反应机理理解为一个总反应所包含的各个元反应的集合。探求一个总反应的机理，实际上就是探求这一总反应究竟包括哪些元反应以及它们按怎样的序列进行。从微观反应动力学角度看，反应机理指微观的基元化学物理反应的详细经过，此反应机理也称分子机理。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条