1) big pulse tube
大尺寸脉管
2) long-size steel tube
大尺寸钢管
3) large-size
大尺寸
1.
Laser vision-based measurement of large-size part straightness;
基于激光视觉的大尺寸测量系统的研究
2.
Using this apparatus shear strength of large-size fissured loess samples formed in different time are tested with different loading methods.
介绍了一种改装的便携式直剪仪,并用该仪器测试了不同形成时期、不同加载方式作用下大尺寸裂隙性黄土样的抗剪强度。
3.
Adenosine triphosphate (ATP) is an important high-energy compound widely used in clinical treatment,and,a novel separation method of using large-size anion-exchange supermacroporous cryogel was developed in this paper to isolate the ATP directly from crude fermentation broth of Saccharomyces cerevisiae.
使用一种新型的大尺寸弱阴离子交换晶胶柱从酵母细胞发酵液中一步分离纯化广泛应用于临床治疗的高能化合物三磷酸腺苷(ATP)。
4) big size γ'
大尺寸γ'
1.
The results indicate that there is a strong relation between the characteristics of previous particle boundary and oxygen content,when the oxygen contentis below 40 ppm,previous particle boundary is constitutded of big size γ′ mostly,when the oxygen is beyond 70 ppm,previous particle boundary is constituted of MC carbide mostly.
当氧的含量低于40×10-6时,原始颗粒边界主要由大尺寸γ′组成,这种原始颗粒边界不会对合金的力学性能产生影响;当氧的含量大于70×10-6时,原始颗粒边界主要由MC型碳化物组成,这种原始颗粒边界将对合金的力学性能产生不利影响。
5) large size
大尺寸
1.
Research on large size direct shear test for geocell reinforced soil;
土工格室加筋土的大尺寸直剪试验研究
2.
The manufacturing technology is critical for the wide applications of structural ceramics especially for those of large size and special shapes.
工程化制备技术是制约大尺寸先进结构陶瓷应用的关键。
3.
The crystal growth technique of large size Y:PbWO4 crystal by the Bridgman method was discussed.
报道了大尺寸Ｙ：ＰｂＷＯ４晶体的坩埚下降法生长工艺，讨论了影响晶体生长的主要 因素。
6) large dimension
大尺寸
1.
This thesis deals with some issues of materials science and technology in Project "applied research of large dimension concrete pavement slab at Zhengzhou airforce airdrome", one of the Key Technological Research and Development Programs of the Tenth Five-Year Plan for Airforce.
论文研究着眼于两个方面:一是为机场水泥混凝土道面板大尺寸化和道面混凝土高性能化进行道面混凝土材料设计;二是针对广泛存在的水泥混凝土结构裂缝和耐久性问题,探索新的阻裂增强技术。
2.
To accomplish the task of measuring the roundness of the large dimension andheavy workpieces, an overall design project of measuring large dimension bearing ringhas been developed, by using modular overall structure.
为了解决大尺寸和重型零件圆度误差的测量问题，提出了大尺寸轴承环测量系统的总体设计方案，采用模块化的总体结构，对于尺寸大于回转工作台的轴承环采取传感器旋转方式测量，对其它尺寸包括重型轴类零件采取工作台旋转方式测量。
3.
This paper introduces a novel precision measuring technology for large dimensions using two longitudinal modes He-Ne laser withthermal frequency stabilization as light source .
介绍一种以双纵模热稳频He-Ne激光为光源进行大尺寸精密测量的新技术。
补充资料：工程图标准尺寸及坐标尺寸
标准标注类型，是我们常用的标注类型。而坐标标注是便于数控加工采用的另一中标注形式。PRO/E可以将两种标注方式进行转换。
· 3.2 标准标注到坐标标注的转换
注意： 转化为坐标标注的尺寸必须是线性标注的，下列尺寸不能转化为坐标标注：
- 被显示成线性尺寸的直径
- 中心线尺寸
- 选择MODIFY DRAW > Dim Params > Dim Type > Ordinate Dim > Create Base.
- 选择作为参考基准线的尺寸
- 选择基准的引出线，该点为0点
- 选择 MOD DIM TYPE > Lin to Ord .
- 选择线性尺寸：注意：必须选择具有相同基准的尺寸
========>>>>
1. 选择 DIM PARAMS > Diam Dim Type .
2.点击Ord to Lin 
3.选择尺寸即可
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条