1) APDL
参数化设计语言APDL
1.
Choose 40CrNiMoA as the material of elastic components of VWS and use Ansys Parameter Design Language(APDL)to model the elastic components.
选用力学性能比较好的40CrNiMoA作为弹性元件的材料,并采用参数化设计语言APDL,对振弦式力传感器的弹性元件进行参数化建模,并对尺寸进行优化设计。
2) Parameter Design Language(APDL)
参数化设计语言（APDL）
3) parameters
参数
1.
Calculation about kinetic parameters for non-isothermal crystallization of amorphous alloy based on thermal analysis techniques;
基于热分析的非晶合金非等温晶化动力学参数计算
2.
The Visual Teaching in the Measurement of Gear Parameters;
谈“齿轮参数测量”的直观教学
3.
Substituting adjustable parameters of machining cutter for the NC coordinates to machine special type of helicoid cutters;
增加调节参数代替联动坐标加工特种回转面刀具
4) parameter
参数
1.
Parameter Determining of Crushing Experiment Numerical Simulation;
破碎实验数值模拟的参数确定
2.
Adjustment of speed and position parameters on motion control system of start-stop shear;
飞剪运动控制系统速度与位置参数整定
3.
Choice of parameter and calculation ways in designing dust-collecting sleeve;
袋式除尘器设计参数的选择和计算方法
5) process parameter
参数
1.
Based on laboratory experiments and industrial trials on the 100 m2 sinter machine,it was found that sinter strength can be reached over 80 % by optimizing the raw material composition,adjusting process parameters and other measures such as controlling sinter basicity and silica content.
在实验室实验和工业性试验研究的基础上,通过对占入炉料80%以上的烧结矿进行优化原料结构、选择合理成分、调整工艺技术参数等一系列有效措施的实施,使得100 m2烧结机生产的烧结矿转鼓强度达到80%以上,粉率降低,使高炉透气性得到改善。
2.
On the basis of the study of laboratory experiments and industrial trials on the 100m2 sinter machine, it was found that the sinter strength could reached over 80% by optimizing the raw material composition, adjusting process parameter and adopting other means such as controlling the sinter basicity and silica content.
在大量实验室试验和工业性试验的基础上,通过对烧结原料结构进行优化、选择合理成分、调整工艺参数等一系列措施,使得太钢100m2烧结机生产的烧结矿转鼓强度达到80%以上。
3.
On the basis of the study of laboratory experiments and industrial trials on the 100m~2 sinter machine,it was found that the sinter strength could reached over 80% by optimizing the raw material composition,adjusting process parameter and other means such as controlling the sinter basicity and silica content.
在大量的实验室试验和工业性试验研究的基础上,通过对占入炉料80%以上的烧结矿进行优化原料结构、选择合理成分、调整工艺技术参数等一系列有效措施的实施,使得100m~2烧结机生产的烧结矿转鼓强度达到80% 以上。
6) coefficient
参数
1.
Simulation of Repetitive Controller s Coefficient in UPS;
UPS逆变器的重复控制器参数的仿真分析
2.
The dry curve equations were fitted,the dynamics parameter,such as the critical water content,heat transmission membrane coefficient α,and quality transmission coefficient k_H,were calculated.
研究了一定条件下风速与风温对经烫漂预处理的洋葱薄层热风干燥过程的影响,拟合了干燥曲线方程,并计算了临界含水量、传热膜系数α与传质系数kH等动力学参数。
参考词条
补充资料：BASIC语言(见程序设计语言)
BASIC语言(见程序设计语言)
BASIC
吕AS{CBASICyLJy〔1下〕语言(BASIC)见程序设计语言。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。