说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 指数分解模型
1)  index decomposition model
指数分解模型
1.
This paper adopts Refined Laspeyres index decomposition model to analyze the dominant effect of China s energy intensity change.
应用Refined Laspeyres指数分解模型,对中国能源强度变动的主导效应进行研究。
2)  exponential analytic model
指数解析模型
1.
An exponential analytic model is proposed in this paper based on the generation system reliability of interconnected areas.
文中提出了基于区域可靠性的发电可靠性指数解析模型,考虑了本区域和互联区域的备用容量以及联络线的传输容量变化对各个区域的发电可靠性的影响,建立了基于影响分布因子矩阵的直观表达式。
2.
Firstly, sensitivity expressions between reliability index and component FOR are deduced theoretically, then the influence of units and tie lines FOR uncertainties on reliability index variance is analyzed, and at last, exponential analytic model is modified based on the presumption that changes in reserve capacity and in units(and/or tie lines) FOR are independent.
分析了新增发电容量和区域之间联络线的强迫停运率(FOR)对互联系统各区域可靠性的影响,提出了基于元件强迫停运率的区域发电可靠性指标灵敏度表达式:首先从理论上推导了互联系统多区域发电可靠性对于发电机组和联络线强迫停运率的灵敏度解析式,并分析机组和联络线FOR的不确定性对区域可靠性指标方差的影响;在此基础上根据区域备用容量变化与机组及联络线FOR变化之间的相互独立性,对互联系统指数解析模型进行修正。
3)  fractional exponential model
分数指数模型
1.
The restrictions of thermodynamics upon parameters of the fractional exponential model [1] are given.
给出了热力学对分数指数模型 [1]参数的限制条件。
2.
From the viewpoint of the restriction of thermodynamics to viscoelastic models, a new practical rheological model, named the fractional exponential model for solids, is proposed in this paper.
从热力学对模型的限制出发,提出了一种工程实用的、新固体流变模型──分数指数模型,它可与实验结果很好吻合,具有简单实用、计算速度快、自相谐调的优点。
4)  Principal component index model
主分量指数模型
5)  exponential dispersion model
指数分布族模型
1.
In this paper, the pairwise conditional score function is proposed to provide us with an interpretation on the Mantel-Haenszel estimator; The expression or the equation of the Mantel-Haenszel estimator is given under the exponential dispersion model.
提出配对数据条件得分函数,用其推广Mantel-Haenszel估计量;给出指数分布族模型下推广的Mantel-Haenszel型估计量表达式或估计方程,解释估计量具有稳健性的原因,并给出应用实例。
6)  index analysis model
指数分析模型
补充资料:迁移效率指数、偏好指数和差别指数


迁移效率指数、偏好指数和差别指数


迁移效率指数、偏好指数和差别指数迁移效率指数是用于测定两地间人口迁移效率的指标。它是净迁移对总迁移之比。计算公式为:EIM一摇寿纂拼又‘。。上式中,}人么夕一材方}为i、]两地净迁移人数;从少+材户为i、]两地总迁移人数;El入了为迁移效率指数。 EIM的取值范围为。至100,如某一地区的值越大,反映迁移的的影响也越大。如果计算i地区与其他一切地区之间的人口迁移效率指数EIM厂,则: }艺材。一芝Mj、}EIM汀艺。+乏M,(j笋i) 迁移偏好指数是从一个地区向另一地区的实际迁移人数与期望迁移人数之比。计算公式为:____M.___材尸2行一:一二子一一不石一二,么M“ 了厂‘.厂‘、八 }二不十二六二1 、厂厂7上式中,M“为从i地迁到j地的实际迁移量;艺材。为总的人口迁移量;尸为总人口;M尸I,j为迁移偏好指数。通过计算迁移偏好指数,可以反映各地区的相对引力。 迁移差别指数是反映具有某种特征的迁移人口与非迁移人口区别的指数。例如,专业技术人员的人数所占比重,各种文化程度人数所占比重等,以便研究人才流失和其他间题。计算公式为:M‘从IMD、一翌不丝xl。。 .义V‘ N上式中,M为迁移人数;M,为具有i特征的迁移人数;N为非迁移人数;N‘为具有i特征的非迁移人数;了八了D、为迁移差别指数。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条