1) transparent
透光
1.
The article discuss the application prospect of light composite material ,domestic and international study progress, the transparent raw material of glass reinforced plastics forms , structural feature, the structure of mezzanine development condition.
论述了透光复合材料的应用前景,国内外的研究进展,透明玻璃钢原材料的组成、结构特征、夹层结构的发展状况等。
2) transparent materials
透光材料
1.
The recent progress in the fnctional high performance polymers and their uses as separating membrane, conductive polymers, nonlinear optics and transparent materials is described.
对高性能聚合物功能化及分离膜、导电、非线性光学、透光材料等功能材料的研究进展作了较为详细的介绍。
3) transmittance
透光率
1.
Studies on the Relations between the Plant Stem of Wheat and the Field Transmittance;
小麦株型与田间透光率关系研究
2.
The phase constitution,surface morphology as well as the ultraviolet-visible(UV-VIS)transmittance and bandgap of the films were investigated by means of X-ray diffractometry,scanning electron microscopy and UV-VIS spectropho- tometry.
随退火时间的延长及CeO_2含量的增加,复合薄膜表面的球形晶粒数量增多,尺寸增大,且复合薄膜的透光率增加,禁带宽度减小。
3.
The transmittance of samples was examined by an UV/VIS spectrophotometer.
用原子力显微镜(AFM)分析了射频磁控溅射工艺参数(功率、压力、时间)对ZnO透明薄膜微结构的影响,并用分光光度计分析了样品的透光率。
4) transparence
透光率
1.
The addition of nucleating agent into PP to improve it's clarity is expounded; the influence of different dosage on the transparence of the articles and the optimum dosage of other additives are studied, the optimized recipe of special PP compound is determined.
文中阐述了在聚丙烯中加入成核剂以提高PP的透明性;研究了成核剂的不同用量对制品透光率及机械性能的影响以及其它助剂的最佳用量,确定了透明聚丙烯专用料的优化配方。
2.
The filtration speed, the yield, DE value and transparence of sugar liquid from these two crafts were measured and analyzed.
通过对比分析两种工艺流程所得糖品的过滤速度、DE值、出品率、透光率等可知,本研究所确定的工艺具有用水量少,液化、糖化时间短等优点,用水量由原来的6∶1降为3∶1,液化时间由原来的0。
5) power of transmitted light
透光强度
6) transmittance
透光性
1.
The preparation,transmittance-related factors,application and the latest status of transparent AION ceramics were studied in detail.
综述了透明AlON陶瓷材料的制备工艺、透光性影响因素、主要应用及研究现状。
2.
Transmittance and photocatalytic activity were respectively investigated and tested for these nanometer thin films prepared with different amount of lanthanum (La), different amount of polyethylene glycol (PEG), and different coating layer times.
论文对不同的掺镧量、不同的聚乙二醇加入量以及不同镀膜次数的TiO_2材料的透光性、光催化降解性分别进行了测试和研究,并对相关机理进行了探讨。
3.
X-ray diffraction (XRD) and transmittance measurements were employed to analyze the crystallinity and optical properties of the films.
采用X射线衍射(XRD)、透过率(Transmittance)等分析方法,对Zn1- xMgxO薄膜的晶体结构及透光性进行了表征。
参考词条
补充资料：“内清质以昭明”透光镜
“内清质以昭明”透光镜 西汉中晚期青铜镜。直径11.5厘米，镜背有连弧纹，铭文“内清质以昭明”。镜的外形与一般青铜镜无异，但当光线照射镜面时，与镜面相对的墙上映出的影象与镜背纹饰相应，这就是所谓“透光”效应。现藏上海博物馆。透光镜发明于西汉，著名的西汉透光镜还有“见日之光，天下大明”八字铭文的。隋唐之际王度的《古镜记》、宋周密的《云烟过眼录》等，都有关手透光镜的记载。这种镜的效应实际不是透光而是映象。上海交通大学铸工教研组的研究认为：铜镜在铸造过程中，镜背的花纹凹凸处凝固收缩，产生铸造应力；研磨时又产生压应力，因而形成弹性形变。研磨到一定程度时，这些因素迭加地发生作用，使镜面产生与镜背花纹相应而肉眼不易觉察的曲率，引起“透光”效应。透光镜的发明，反映了两千年前我国劳动人民的智慧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。