1) Pressing density
压制密度
1.
Study is made on the influence of pressing density and sintering temperature on the electrical properties of a typical tantalum capacitor with 16 V/100 μF solid electrolyte using tantalum powder with a specific capacity of 30 000 μF·V/g as the raw material.
V/g的钽粉,研究了压制密度和烧结温度对产品电性能的影响。
2) pressed density
压制密度<冶>
3) impression control
压印密度控制
4) density control fracture
密度控制压裂
5) green density
压坯密度
1.
Warm compaction behavior of 316L stainless steel was investigated, influences of processing parameters of warm compaction on green density of 316L stainless steel were studied.
研究316L不锈钢的温压行为,分析温压工艺参数对压坯密度的影响。
2.
It is found that the green density and sintered density of YBa_2Cu_3O_(7-δ) powders with different granularity varied differently with the variation of pressure.
结果表明,不同粒度YBaCuO超导粉体的压坯密度、烧结密度(即烧结前后的致密度)随压力的变化规律不同。
3.
Influences of processing parameters of warm compaction on green density of 420 stainless steel were studied.
对420不锈钢粉末进行温压,探索温压工艺参数对压坯密度的影响,并对温压与室温模压(添加0。
6) compact density
压坯密度
1.
The effect of compact density on combustion synthesis of Fe-V-C mixture powders based in electric field was studied using Gleeble thermal simulation equipment.
采用Gleeble热模拟机,在电场和大热流密度作用下,研究压坯密度对Fe-V-C三元系粉末压坯燃烧合成的影响。
2.
Using Gleeble-1500D thermal simulation equipment, the effect of compact density on the low temperature combustion synthesis process of the compact of 55wt%(Ti+C)-45wt%Fe mixture powders was studied.
采用Gleeble-1500D 热模拟机,在电场和大热流密度作用下,研究压坯密度对55%(Ti+C)-45%Fe(质量分数)粉末压坯低温燃烧合成过程的影响。
3.
The paper analyzed the effect of sintering temperature,ball milling method and compact density on the density of MoSi2 disperslion-strengthened copper alloy.
分析了烧结温度、球磨方式和压坯密度对MoSi2弥散强化铜合金烧结密度的影响。
补充资料：非密度制约因素(见密度制约因素)
非密度制约因素(见密度制约因素)
l焦非密度制约因素见生态因素、密度制约后
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条