1) residual voltage
残压
1.
Through theoretic analysis and experimental verification, it points that surge protective device consisting of zinc oxide varistor has a certain connection with residual voltage under different impulse discharge current, and thereafter the residual voltage of surge protective device can be estimated.
通过理论分析和实验验证,指出氧化锌压敏电阻和由其组成的电涌保护器,在不同冲击放电 电流下的残压具有一定的关联性,进而提出电涌保护器的残压可以估算。
2.
When dete rmine whether the three phases are in balance, directly measuring phase residual voltages to ground is proved to be inaccurate.
通过测量各相对地的残压来判定发电机三相是否对称的方法是不准确的。
3.
As the main appliance for overvoltage protection in electric system, the characteristic of Metal Oxide Surge Arresters (MOA) is decided by the unit residual voltage of non linear resistance.
金属氧化物避雷器作为电力系统过电压保护的主要电器 ,其保护特性非线性电阻片的残压决定。
2) residual pressure
残压
1.
In the paper, Xingxingshao Hydropower Station in Yongji County, Jilin Province, which develops the principles, characteristics, installation and wiring of the Electronic Speed Indicator through utilizing the residual pressure of generator.
本文阐述了吉林省永吉县星星哨水库水电站利用发电机残压自行研制出的电子式转速表的工作原理、特点、安装与接线,说明了该装置在发电机组上的应用,收到了良好的效果。
3) residual pressure drop
残余压降
1.
Based on analyzing the mechanism of filtration, some parameters which affect the filtration efficiency, pressure drop or residual pressure drop, such as structure of the mesh, cycle index, filtration velocity, fluid concentration and temperature, compressibility of filter cake, maximum permission pressure drop and backflowing pressure, are discus.
在分析过滤机理的基础上,从过滤效率、压降、残余压降三个方面,分析了过滤器性能的影响因素,包括丝网结构、循环次数、过滤速度、流体浓度及温度、颗粒粒径、滤饼的可压缩性、最大允许压降、反吹压力等。
2.
The test results show that in the initial period of the filtration cycle,the residual pressure drop of the filter increases rapidly,and then increases slowly.
实验结果表明,过滤循环初始阶段滤管残余压降上升较快,随后上升趋势逐渐变缓;随着温度的升高,滤管的初始压降升高,形成的粉尘层也越疏松。
5) remaining pressure
残余压强
1.
Taking the air-jet vacuum pump as the research object and utilizing the software of FLUENT to simulate the flow field of air-jet vacuum, in a certain operating condition, the influences of five structure parameters on the remaining pressure in air-jet vacuum pump are obtained.
以空气射流真空器为研究对象,采用FLUENT软件对其内部流场进行数值模拟,得出在一定的工况下,空气射流真空器5个结构参数对其残余压强的影响情况。
2.
In a certain operating condition,the influences of the structure parameters ratio of areas,angle of mixing section,distance between nozzle exit and inlet of throat section,length of throat section,and angle of(diffuser) section on the remaining pressure in air-jet vacuum pump are analyzed.
分析了一定工况下,面积比、吸入段锥角、喉嘴距、喉管长度和扩散段锥角对空气射流真空器残余压强的影响,得到较优的结构参数,为空气射流真空器的设计和研究提供一定的理论支持。
6) and Left-over voltage measuring
测试残压
补充资料：冲击波超压与动压