1) cancerous cachexia
液质
1.
Traditional Chinese medicine combined with medroxyprogesterone acetate to treat cancerous cachexia in patients with advanced cancer;
中药合并醋酸甲羟孕酮改善晚期癌症患者恶液质
2) liquid-liquid mass transfer
液液传质
1.
Aiming at the interfacial phenomena of liquid-liquid mass transfer and its characteristic,by using of the real-time holographic technique,the concentration distributions on the aqueous side were obtained according to holographic diagrams of mass transfer of ethanol through the interface of oil and water at different initial concentrations.
为了研究液液传质过程的界面现象及传质特征,采用实时激光全息干涉技术,根据不同初始浓度时乙醇通过油水界面传质过程的全息干涉图,得到了传质过程水相侧的浓度分布,据此求出了近界面浓度和基于浓度的传质系数,并关联了近界面浓度与主体相溶质浓度的关系。
3) solution property
溶液性质
1.
The GPC/RI-DV-RALLS Multi-detection technique was used to measure solution property of nonlinear optical polymer,substituted polyacrylates and carefully investigated the influence of the rigid conjugated side-chain structure and the linked flexible chain structure between rigid conjugated group and major-chain on the characteristic viscosity,unperturbed dimensions 0/M and Flory's.
采用凝胶渗透色谱示差折光指数(RI)/黏度(DV)/激光光散射(RALLS)三检测联用技术,研究了非线性光学聚合物———侧链型聚丙烯酸酯的溶液性质,详细分析了侧链刚性共轭结构以及刚性共轭基团与主链之间连接链的方式与结构对高分子特性粘数、均方旋转半径0/M和Flory特征比C∞的影响。
2.
Latest advances in the research of molecular structure model and polymerization method, solution structure forming mode and type, effect of polymer molecular structure on solution property and adsorption of polymer on solid liquid interface are reviewed.
从疏水缔合聚合物的分子结构模型及聚合方法、溶液结构形成方式与类型、聚合物分子结构对溶液性质的影响以及聚合物在界面的吸附行为等方面综述了最新研究进展 ,展望了它在油气开采、污水污泥处理、涂料工业、生物医药、工程材料等方面的应用前景。
4) film mass transfer
液膜传质
1.
The diffusivity of EM was determined by fitting the adsorption rate curves for different temperatures and initial EM concentrations, and the film mass transfer coefficient and pore diffusion coefficient we.
采用液膜及孔内扩散模型,模拟不同温度和不同红霉素(EM)初始浓度条件下,大孔吸附树脂HZ816及XAD16吸附红霉素的动态吸附曲线,并获得液膜传质及孔内扩散系数;考察了温度及溶质浓度对红霉素在两种树脂中吸附动力学的影响。
2.
With the film mass transfer,porous diffusion and axial dispersion were taken into account,and a film and pore diffusion model was employed to describe the diffusive mass transfer of .
并采用基于液膜及孔内扩散模型的动力学模型,同时考虑吸附树脂颗粒内外扩散阻力及轴向扩散的影响,研究了固定床上红霉素在大孔吸附树脂中的吸附动力学,并从穿透曲线回归得到液膜传质系数孔内扩散系数。
5) LC-MS
液质联用
1.
Plasma concentration of sibutramine hydrochloride in beagle dog assayed by LC-MS and study on its pharmacokinetics;
液质联用测定犬血浆中盐酸西布曲明浓度和药动学
2.
Study on the Analytical Methods of Allergenic Disperse Dyes and Sudan Dyes by HPLC and LC-MS;
致敏性分散染料和苏丹红染料的高效液相色谱及液质联用分析方法的研究
3.
Determination and Identification of Related Substances in Estriol by HPLC and LC-MS
RP-HPLC法和液质联用技术检查雌三醇中的有关物质
6) liquid medium
液体介质
1.
Influence of liquid medium on ultrafine grinding of pyrite;
液体介质对黄铁矿超细粉碎的影响
2.
Experimental investigations on stimulated Brillouin scattering for different liquid mediums;
不同液体介质的受激布里渊散射的实验研究
3.
Using two kinds of liquid medium and two dispersants, we investigated the dispersed characteristic of Ti(C,N)-based cermet hard phase powders TiC, TiN and WC.
探讨了不同液体介质和不同表面活性剂对硬质相粉末分散的影响,结果表明:以蒸馏水作液体介质优于以无水乙醇作液体介质;对TiC,TiN粉末,选用聚氧乙烯十二烷基醚作为分散剂具有较好分散效果,而对WC粉末,聚乙二醇是较好的分散剂。
补充资料：恶液质
恶液质
参见"恶病质"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条