1) temporary restorative material
暂封材料
1.
An in vitro evaluation of coronal microleakage of five temporary restorative materials used in endodontic access cavities;
五种髓腔暂封材料冠方微渗漏的体外评价
2) Dental temporary crowns material
暂时冠材料
3) sealing materials
封孔材料
1.
In order to improve the sealing effect of CMM drainage boreholes, the paper proposes to select new type of sealing materials according to the geological conditions of the coal seams and to carry out combined sealing of boreholes in order to improve the sealing property.
为提高矿井煤层气抽采钻孔封孔效果,提出了应针对煤层地质条件,优先选择新型封孔材料及联合封孔,提高钻孔密封性,且使用钻孔漏气部位检测装置确定合理的封孔深度。
4) sealing material
密封材料
1.
Effect of glass fiber on properties of rubber sealing material;
玻璃纤维对橡胶密封材料性能的影响
2.
Design and Characterization of a kind of C/C sealing material;
一种C/C密封材料的设计与性能表征
3.
The effect of filling modification with barium sulfate on the performances of PTFE sealing materials;
硫酸钡填充改性对PTFE密封材料性能的影响
5) encapsulating material
灌封材料
1.
Study on modified epoxy resin-encapsulating materials
改性环氧树脂灌封材料的研制
2.
Milled glass fiber (MG)/polyurethane (PU)/epoxy resin (EP) encapsulating material was prepared by vacuum priming.
采用真空灌注工艺,制备磨碎玻璃纤维(MG)／聚氨酯(PU)／环氧(EP)灌封材料,并对其力学性能和微观结构进行研究。
3.
Epoxy resin/nano-silica encapsulating materials were obtained from in situ polymerization, and microstructure and properties of the materials were investigated by transmission electron microscopy(TEM),scanning electron microscopy(SEM) and differential scanning calorimetry(DSC).
采用原位聚合法制备了环氧树脂/纳米S iO2灌封材料。
6) packaging material
封装材料
1.
Preparation and properties of epoxy resin/ZrW_2O_8 packaging materials;
环氧树脂/ZrW_2O_8封装材料的制备及其性能
2.
Research on epoxy-based packaging material based on magnetic core;
基于磁芯的环氧树脂基封装材料研究
3.
Novel 60Si40Al alloy packaging material by spray forming process;
新型60Si40Al合金封装材料的喷射成形制备
补充资料：封接材料
分子式：
CAS号：
性质：液晶显示器用封接材料有封接胶黏剂、堵口胶黏剂及导电胶黏剂。封接胶黏剂用于将液晶盒的上下两板封接，一般多为单组分或双组分的环氧胶黏剂。堵口胶黏剂用于灌注液晶后将液晶盒的灌注口封上，可用室温固化的环氧胶黏剂和UV固化胶黏剂，UV固化胶黏剂固化时间短，粘接强度高，较受欢迎。导电胶黏剂用于将一片导电玻璃上的电极引至另一片，除了要求导电性能好外，还要求导电胶黏剂的其他性能与封接胶黏剂匹配。导电胶黏剂一般由粘接树脂、导电填料和添加剂组成。
CAS号：
性质：液晶显示器用封接材料有封接胶黏剂、堵口胶黏剂及导电胶黏剂。封接胶黏剂用于将液晶盒的上下两板封接，一般多为单组分或双组分的环氧胶黏剂。堵口胶黏剂用于灌注液晶后将液晶盒的灌注口封上，可用室温固化的环氧胶黏剂和UV固化胶黏剂，UV固化胶黏剂固化时间短，粘接强度高，较受欢迎。导电胶黏剂用于将一片导电玻璃上的电极引至另一片，除了要求导电性能好外，还要求导电胶黏剂的其他性能与封接胶黏剂匹配。导电胶黏剂一般由粘接树脂、导电填料和添加剂组成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条