1) in situ hybridization
原位分子杂交法
1.
Objective To explore the sensitivity and specificity of in situ hybridization in human papillomavirus in condyloma acuminata tissues and compare with acetowhitening and biopsy.
目的探讨原位分子杂交法诊断尖锐湿疣的敏感性与特异性,并与组织病理及醋白试验相比较。
2) in situ
原位
1.
Research progress on enhancement of in situ remediation of heavy metal by electrokinitics;
重金属污染土壤的电动原位修复技术研究
2.
Investigation of mechanical properties and damping capacity of in situ TiB_2/7055 composites;
原位TiB_2/7055铝基复合材料的力学性能与阻尼性能
3.
Conductive polyaniline/chlorosulfonated polyethylene composites prepared by in situ emulsion polymerization and their properties;
原位乳液聚合制备导电性聚苯胺/氯磺化聚乙烯复合材料及其性能
3) orthotopic
原位
1.
Urodynamical examination of orthotopic ileal neobladder with laparoscopic radical cystectomy;
腹腔镜下膀胱全切除、原位回肠新膀胱的尿流动力学分析
2.
The clinical management of cardiovascular complications after orthotopic liver transplantation;
原位肝移植术后心血管并发症的临床处理
3.
Establishment of multidrug resistance in a model of orthotopic transplantation of human hepatocellular carcinoma in nude mice and study on the mechanism of multidrug resistance;
裸鼠人肝癌原位移植多药耐药模型的建立及其耐药机制的探讨
4) In-situ
原位
1.
Improving Tribological Properties of Metal Materials Based on in-situ Tribochemical Treatment Technique;
基于原位摩擦化学处理技术改善金属材料的摩擦学性能
2.
Biodiesel from Rapeseed via Extraction and in-situ Transesterification in Supercritical Methanol;
油菜籽与超临界甲醇原位萃取-酯交换反应制备生物柴油
3.
A novel strategy to fabricate in-situ surface reinforced metal composite;
原位制备表面增强复合材料的一种新方法
5) in-situ reaction
原位反应
1.
Preparation of polyester/nano-ZnO composites by in-situ reaction;
原位反应合成聚酯/纳米氧化锌复合材料
2.
Fabrication of Al_2O_3-TiC/Al Composites by In-situ Reaction;
原位反应法制备Al_2O_3-TiC/Al复合材料
3.
In-situ reaction and phase composition design of monolithic refractories;
不定形耐火材料中的原位反应与相组成设计
6) in situ polymerization
原位聚合
1.
Preparation of microcapsules for electrophoretic display via in situ polymerization of urea-formaldehyde;
一步原位聚合法制备电泳显示微胶囊的研究
2.
Unsaturated polyester resin(UP) /kaolinite intercalation nanocomposites were prepared by in situ polymerization through UP replacing DMSO in kaolinite/ DMSO intercalation usher,which was prepared by sonochemistry technique.
利用超声法制备了高岭土-DMSO插层复合物前驱体,采取二步取代,原位聚合制备了不饱和聚酯树脂/高岭土纳米复合材料,并用XRD、FT-IR等手段对材料结构进行了表征,研究了纳米复合材料的阻燃性能。
3.
Polyamide 6(PA6)/silica nanocomposite was prepared by using tetraethoxysilane(TEOS) as precursor and 3-glycidoxypropyltrimethoxysilane(WD-60) as modifier through in situ polymerization.
以正硅酸乙酯(TEO S)为前驱体,环氧丙基三乙氧基硅烷(W D-60)为改性剂,经原位聚合制备PA 6/S iO2纳米复合材料。
参考词条
补充资料：荧光原位杂交
荧光原位杂交
是以荧光素标记取代核素标记而形成的一种新的原位杂交方法。利用已知碱基序列的非核素标记的核酸探针，依据碱基配对原理，通过免疫细胞化学检测体系，在组织切片、细胞间期核或染色体等标本上，进行DNA定性、定位及定量分析。本法快速、安全、灵敏度高，特异性强。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。