1) in situ
原位析出
1.
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
采用激光熔覆搭接技术 ,在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
2.
Metal matrix composite layers reinforced by in situ WC particles were formed by laser cladding using pre pasted (1.
2 %Zr+40 %WC) /FeC SiBRE合金粉末 ,制备出原位析出的颗粒增强金属基复合材料表层。
3.
Metal matrix composite layers reinforced by in situ particles were formed by laser cladding using prepasted 2.
采用激光预置熔覆技术,通过在FeCSiBRe合金粉末中单独添加强碳化物形成元素Zr和复合添加Zr、Ti、WC元素和碳化物,在中碳钢基体上制备出原位析出的颗粒增强铁基复合材料表层。
2) in-situ precipitation
原位析出
1.
In order to decrease the wear of piston rings and cylinder liners,and improve partner adaptability,the laser cladding and electroplating techniques were adopted to prepare in-situ precipitation particle reinforced metal matrix composite coatings and chromium-plated coatings on the nodular cast iron matrix.
为降低活塞环、缸套摩擦副的磨损和改善配副性,采用激光熔覆和电镀技术在球墨铸铁表面分别制备原位析出颗粒增强金属基复合材料表层和镀铬层。
3) deposition potential
析出电位
4) Original position analysis
原位分析
1.
The central segregation of continuously cast slab of 10CrNiCu steel and its effect on mechanical properties were studied by original position analysis(OPA).
采用金属原位分析(OPA)方法研究了连铸10CrNiCu钢中心偏析的状况及其对材料性能的影响。
2.
The fundamental principles and analytical methods of the original position analysis (OPA) with spark source spectrometry are introduced.
采用原位分析技术研究了连铸板坯较大范围内的成分分布、偏析、疏松、夹杂和其他缺陷的分析方法。
3.
The application of original position analysis is applied for quality control of low alloy steel billet.
采用原位分析技术对不同结晶态的低合金钢连铸方坯的成分分布、偏析、疏松、夹杂和其他缺陷进行了分析。
5) in-situ precipitation
原位沉析
1.
Then the organic-inorganic composite CaCO3/PU was prepared via in-situ precipitation method.
用甲苯二异氰酸酯(TDI)与二羟甲基丙酸(DMPA)合成带有羧基的两亲加聚物P(TDI-DMPA)(简称PU),通过原位沉析法制备了CaCO3/PU复合材料。
2.
Chitosan/CaCO_3 composite with high performed, potential applicant was prepared by the method of in-situ precipitation and reaction.
本文在实验室原有工作的基础上,利用原位沉析法和原位合成的原理,制备了无机矿物—碳酸钙为分散相,生物高分子材料—壳聚糖为基体的复合三维材料。
6) In Situ Analysis
原位分析
1.
Preparation of tissue array and applications of in situ analysis technology;
组织芯片制备与原位分析技术
补充资料：白细胞析出
白细胞析出
白细胞通过血管壁进入周围组织的过程，又称白细胞渗出。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条