1)  Co-Cr alloy
钴-铬合金
1.
Research on preparation and mechanical function of TiN coating on Co-Cr alloy;
钴-铬合金表面氮化钛薄膜的制备及其机械性能的研究
2)  Co-Cr alloy
钴铬合金
1.
Research on micro-plasma arc welding of Co-Cr alloy metal in oral cavity repair;
牙科用钴铬合金的微束等离子焊接研究
2.
Effects of cryogenic treatment on bond strength of porcelain fused to Co-Cr alloy;
深冷处理对钴铬合金烤瓷冠金瓷结合力的影响
3.
An in vitro study of influence of TiN coat on Ni-Cr、Co-Cr alloy on adhesion of bacteria;
镍铬及钴铬合金材料表面改性对细菌黏附的影响
3)  cobalt-chromium alloy
钴铬合金
1.
Mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy;
激光焊接铁铬钼合金与钴铬合金的机械性能
2.
Effect of porcelain bake cycles on oxide layer formed on cobalt-chromium alloy surface;
烤瓷次数对钴铬合金表面氧化膜形成的影响
3.
The finite element method was used to simulate the expansion behavior of a cobalt-chromium alloy stent's basic model and integral model to investigate the stent's mechanical behavior during the implantation process.
为研究血管支架在移入治疗中的塑性变形行为,利用有限元分析的方法对钴铬合金血管支架的特征模型和整体模型分别进行膨胀模拟分析,并通过与实验数据的比较验证了该有限元分析的合理性。
4)  Co-Cr alloy net
钴铬合金网
1.
Methods: We used PMMA to prepare 30 specimens with the size of 50mm×18mm×2mm each, among which there were 10 specimens with square Co- Cr alloy net put in PMMA and 10 specimens with round Co-Cr alloy net in PMMA and 10 specimens with no Co-Cr alloy net in PMMA.
方法 :用热固化型聚甲基丙烯酸甲酯 (PMMA)制成 5 0 mm× 18m m× 2 m m规格试片 10个 ,在 PMMA中央分别加入方形 ,圆形网眼的铸造钴铬合金网制成 5 0 m m× 18mm× 2 mm规格试片各 10个 ,利用三点弯曲实验 ,用材料力学多功能实验台逐渐加载 ,测定各个样本发生断裂时的力值 ,计算每组样本的平均值 ,通过单因素方差分析和 q检验来分析断裂力值。
5)  Cobalt
钴
1.
Determination of Trace Amount of Cobalt in Water Samples by Spectrophotometry with Cloud Point Extraction;
浊点萃取-分光光度法测定水环境中的痕量钴
2.
Study on removing cobalt by β-naphthol in solution purification for zinc hydrometallurgy;
湿法炼锌溶液净化β-萘酚除钴的研究
3.
Effect of cobalt and its complexation on the key enzymes in methanogenesis;
钴及其配合物对产甲烷关键酶的影响
6)  Co(Ⅱ)
钴
1.
Determination of Trace Co(Ⅱ) in Water by FAAS after Preconcentration with Modified Oorganobentonite by Dithizone;
双硫腙修饰有机膨润土吸附富集火焰原子吸收法测定水中痕量的钴
2.
THE SIMULTANEOUS DETERMINATION OF Bi(Ⅲ)、Cu(Ⅱ)、Co(Ⅱ) AND Ni(Ⅱ) BY THE PARTIAL LEASTSQUARES METHOD;
偏最小二乘-分光光度法同时测定铋、铜、钴和镍
3.
In the presence of Tween-80,the reagent with Co(Ⅱ) forms a salmon pink complex(1∶2) in the buffer solution of Na_2CO_3-HCl at pH 11.
合成了一种新试剂1-(4-磺基苯)-3-(6-溴-苯并噻唑)-三氮烯(SPBMBTT),并研究了在非离子表面活性剂Tween-80存在下与钴(Ⅱ)的显色反应。
参考词条
补充资料：金铬钴合金
分子式：
CAS号：

性质：金基添加铬和钴的三元合金，有AuCrCo2.1-0.25，AuCrCo2.1-0.5和AuCrCO4.2-0.4等牌号。采用真空中频炉充氩保护熔炼，铸锭在热开坯后冷加工成丝材。中间退火在真空中或在木炭保护下进行。用作精密电阻材判。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。