1) blocking and reversing therapy
逆挽截断法
3) Galerkin truncation method
Galerkin截断法
1.
Then, the nonlinear bending of a saturated poroelastic cantilever beam with fixed end impermeable and free end permeable,subjected to a suddenly applied constant concentrated transverse load at its free end,was examined with the Galerkin truncation method.
利用Galerkin截断法,研究了固定端不可渗透、自由端可渗透的饱和多孔弹性悬臂梁在自由端突加集中载荷作用下的非线性弯曲,得到了梁骨架的挠度、弯矩以及孔隙流体压力等效力偶等的时间响应和沿轴线的分布。
2.
Based on the mathematical model for large deflection of saturated poroelastic beam,the dynamical behavior of simply supported saturated poroelastic beam with two permeable ends,subjected to a suddenly applied transversal constant load or a harmonic load,was investigated with Galerkin truncation method.
基于饱和多孔弹性梁大挠度变形的数学模型,利用Galerkin截断法,本文研究了两端可渗透的简支饱和多孔弹性梁分别在突加横向均布常载荷和简谐载荷作用下的动力响应,得到了梁弯曲时挠度、弯矩以及孔隙流体压力等效力偶等随时间的响应,考察了不同载荷下多孔弹性梁弯曲的响应特征。
3.
Longitudinal vibration equation which governs a pipeline laying in 3000 meters underwater under construction in the case of untouched seabed is established and solved by Galerkin truncation method.
针对国内目前在建的3000m深海管道铺设系统,在管道未触海床的悬空工况下,建立了管道的纵向振动方程,应用Galerkin截断法对方程进行了求解,并进一步分析了波高、波频等海况参数对管道各截面动态应力和振动幅值的影响,分析结果有助于深入了解大深度管道铺设中的动力学行为,并可为深海管道铺设施工设计提供理论依据。
4) truncation method
截断方法
1.
This article first gives a brief introduction to a truncation method for computing one dimension and two dimension transforms with applications to image processing, then emphasizes the parallel implementation on MPP dawn1000 using the blocked method according to the characteristic of image operation.
首先简要地介绍了用于图像处理的一维和二维Walsh变换的一种截断方法,然后根据图像操作的特点,着重介绍了用分块的方法在大规模分布存储并行机曙光-1000上的并行实现。
5) cut-off point method
截断点法
1.
Considering the physical features and computing requirements of in-water profile spectral data,the cut-off point method is adopted to identify the outliers in in-water profile spectral data,and is compared with the other two common methods(the triple standard difference method,ratio method proposed in ProSoft software).
针对水下剖面光谱原始数据的物理特点和计算要求,应用截断点法对其异常值进行判断,并与另外两种较常用的异常值判断方法(三倍标准差法、P roSoft软件中的比值法)进行了比较。
6) cut-back method
截断法
1.
Three attenuation measuring methods for plastic optical fiber including the cut-back method, the insertion-loss method and the back-scattering method are introduced.
介绍测试塑料光纤衰减的三种方法:截断法、插入损耗法和后向散射法。
补充资料:承挽
承挽 竹制家具部件之一。承挽是嵌在支架头围上、竹面下的零件,在竹面中部受到压力时,以支撑竹面不弯曲脱落。承挽主要有两种:一种是方形承挽,主要用于小型家具。另一种是半圆形承挽,常用于大、中型家具。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条