1)  turbulent mixing
紊流掺混
2)  turbulent mixing coefficient
紊流掺混参数
3)  turbulent diffusion coefficient
紊流掺混系数
4)  Turbulent flow
紊流
1.
A performance prediction model with a turbulent flow effect for water-production gas wells;
一种考虑紊流影响的产水气井开采动态预测模型
2.
Experimental analysis on influence from sudden change of roughness of open channel bottom on friction velocity of turbulent flow and wall shear stress;
明渠渠底糙率突变对紊流摩阻流速及壁面切应力影响的试验分析
3.
Simulations of Three-Dimensional Turbulent Flow with Complex Boundary Conditions;
复杂边界条件下的三维紊流数值模拟研究
5)  turbulent
紊流
1.
Formation and control of turbulent in metal melts purified by alternating magnetic field;
交变磁场净化金属液时金属液紊流的形成及其控制
2.
Numerical analysis of rotating 3-D turbulent flow field;
旋转三维紊流流场的数值分析
3.
Numerical analysis of three dimensional turbulent flow through a turbine spiral casing for Three Gorge projects;
三峡机组蜗壳内紊流的三维数值分析
6)  turbulent fluid flow
紊流
1.
A 3-D comprehensively coupled model has been developed for iron-carbon binary system to describe the turbulent fluid flow, solidification and solute transport in the parallel type mold of thin slab.
针对薄板坯平行板型连铸结晶器,建立了Fe-C二元合金紊流流动、凝固及溶质传输的三维耦合数学模型；并与水口模拟计算相结合,计算、分析了薄板坯平行板型结晶器内钢液的紊流流动、凝固及溶质分布,计算结果表明,由于薄板坯厚度尺寸限制,钢液液流冲击深度相对传统板坯明显减小,出水口射流对窄壁的冲击减弱,而对铸坯宽面的冲刷加强,出结晶器后,钢液流动变为向下的均匀平推运动,在结晶器出口处,由于钢液流动、凝固及溶质传输的相互作用,使得铸坯宽面靠近窄壁处的凝固壳厚度最薄,并在此处产生溶质分布强烈变化,易导致拉漏缺陷。
2.
Based on the continuum model for binary iron-carbon alloy under local thermodynamic equilibrium condition a 3D model coupled turbulent fluid flow, solidification and solute transport has been developed for square billet continuous casting process.
采用 Ｆｅ二元合金的连续介质模型，对方坯连铸过程进行紊流流动、凝固及溶质传输的三维耦合数值模拟。
3.
Effects of Drawing Velocity on Turbulent Fluid Flow,Temperature Field and Solute Segregation in Continuous Casting Thin Slab;
模拟计算了薄板坯连铸过程中的紊流速度场、温度场及溶质场分布,计算分析了拉速变化对三场及凝固过程的影响。
参考词条
补充资料：掺混增塑剂
分子式：
CAS号：

性质：采用两种以上增塑剂配合使用，性能互补以达到良好的综合性能，此配合体系即为掺混增塑剂。具有高的增塑效率、持久增塑性、良好的加工性，并使制品具有较好的力学性能、电性能及卫生性能等，同时还能降低价格以具有经济性。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。