1)  remelted coating
重熔层
1.
The microstructure of the remelted coating is that the block-like WC pha(?) is evenly distributed over the matrix of Ni-Fe-Cr solid solution,CrB and Ni_3B.
这时重熔层的相组成是块状WC均匀分布在由Ni-Fe-Cr固溶体和CrB、Ni3B等组成相组成的基体中。
2)  hardface remelted layer
堆焊重熔层
1.
Effect of different laser powers on structure and properties of Co-based alloy hardface remelted layer;
不同激光功率对Co基合金堆焊重熔层组织和性能的影响
3)  remelting
重熔
1.
Effect of Remelting and Aging Process on Microstructure and Tensile Strength of ZL101 Al Alloy;
重熔与时效工艺对ZL101铝合金组织与抗拉强度的影响
2.
High Frequency Induction-remelting of Arc-spraying Aluminum Coating on Iron Substrate;
铁基电弧喷涂铝层的高频感应重熔工艺
3.
The SME Analysis of Remelting NiTi Shape Memory Alloys;
重熔镍钛合金的形状记忆效应分析
4)  remelt
重熔
1.
Surface property and structure study of stainless steel remelted by plasma arc. Journal of Zhejiang Agricultural University;
等离子重熔不锈钢表面性能及组织研究
2.
In this paper, the influenceof remelt and insulation during the secondremelt on the carbide structural in- heritance of high chromium cast iron were studied.
采取重熔的工艺措施并在第二次重熔时进行保温处理,研究高铬白口铸铁中碳化物的遗传性并对高铬白口铸铁的力学性能进行测试。
3.
And remelt procedure parameters of deeper coating layer and wide areas spray welding were achieved.
通过对 170 0轧机输送辊的喷焊工艺研究 ,解决了输送辊成功喷焊所需的工艺装备 ,获得了有关大面积厚涂层重熔的工艺参数 ,为辊类产品表面制备耐腐蚀耐磨涂层创造了必要的技术手
5)  re-melting
重熔
1.
The method is simple and feasible of re-melting manganese aluminum particles and waste steel in 0.
5t中频炉,以中碳锰铁、废旧铝粒、废旧钢材为原料按一定比例重熔,生产锰铝合金,实践证明,此方法简便可行,具有一定的经济效益。
6)  electroslag refining
电渣重熔
1.
Analysis and control of hydrogen in electroslag refining process;
电渣重熔过程中氢行为的分析及控制
2.
A lot of tests and analyses show H13 steel made by the craftwork of EAF_LF,VD refining_steel ingot_electroslag refining_forging boasts fine quality.
介绍了莱钢研究开发高品质H13热作模具钢的过程,采用电炉→LF、VD精炼→钢锭→电渣重熔→锻造工艺生产的H13钢在做了大量检验分析后,质量性能优良。
参考词条
补充资料：难熔金属碳化物涂层石墨管
分子式：
CAS号：

性质：用难熔金属碳化物对石墨管进行局部或整体涂覆，克服石墨管多孔易吸附、透气等不利性能。局部涂层法是把碳化锆、炭化钨等悬浮水溶液从进样孔滴入石墨管，然后进行加热处理。整体涂覆采用浸渍法，将石墨管置于上述悬浮液中数小时后，取出干燥加热处理。处理过的石墨管表面可形成致密的碳化物涂层。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。