1) thixo-remelting
触变重熔
1.
To investigate the effect of thixo-remelting time on the morphologies of initial carbides,semi-(solid) billets of Cr17 hypereutectic high chromium cast iron were partially remelted at 1 270 ℃ for four (distinct) periods (5 min, 15 min, 25 min, and 30 min, respectively),and the shape factor and grain factor of carbide grains were characterized quantitatively via a Leica image analyzer.
为考察触变重熔时间对初生碳化物形貌的影响,对Cr17过共晶高铬铸铁半固态坯料在1 270 ℃进行了部分重熔,重熔时间分别为5、15、25和30 min,并借助Leica图像分析仪分别定量描述了碳化物形状因子及粒度因子的变化规律。
2) equipment for semi-solid remelting
触变重熔装置
3) remelting modification
重熔变质
4) remelting
重熔
1.
Effect of Remelting and Aging Process on Microstructure and Tensile Strength of ZL101 Al Alloy;
重熔与时效工艺对ZL101铝合金组织与抗拉强度的影响
2.
High Frequency Induction-remelting of Arc-spraying Aluminum Coating on Iron Substrate;
铁基电弧喷涂铝层的高频感应重熔工艺
3.
The SME Analysis of Remelting NiTi Shape Memory Alloys;
重熔镍钛合金的形状记忆效应分析
5) remelt
[英][ri:'melt] [美][ri'mɛlt]
重熔
1.
Surface property and structure study of stainless steel remelted by plasma arc. Journal of Zhejiang Agricultural University;
等离子重熔不锈钢表面性能及组织研究
2.
In this paper, the influenceof remelt and insulation during the secondremelt on the carbide structural in- heritance of high chromium cast iron were studied.
采取重熔的工艺措施并在第二次重熔时进行保温处理,研究高铬白口铸铁中碳化物的遗传性并对高铬白口铸铁的力学性能进行测试。
3.
And remelt procedure parameters of deeper coating layer and wide areas spray welding were achieved.
通过对 170 0轧机输送辊的喷焊工艺研究 ,解决了输送辊成功喷焊所需的工艺装备 ,获得了有关大面积厚涂层重熔的工艺参数 ,为辊类产品表面制备耐腐蚀耐磨涂层创造了必要的技术手
6) re-melting
重熔
1.
The method is simple and feasible of re-melting manganese aluminum particles and waste steel in 0.
5t中频炉,以中碳锰铁、废旧铝粒、废旧钢材为原料按一定比例重熔,生产锰铝合金,实践证明,此方法简便可行,具有一定的经济效益。
补充资料：触变硅胶蓄电池
分子式：
CAS号：
性质：采用吸收于触变性硅胶的硫酸溶液作为电解质的铅酸蓄电池。如德国Sonnenschein公司生产的Dryfit型系列小型铅酸蓄电池等。
CAS号：
性质：采用吸收于触变性硅胶的硫酸溶液作为电解质的铅酸蓄电池。如德国Sonnenschein公司生产的Dryfit型系列小型铅酸蓄电池等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条